Re: [RFT 2/4] ARM: dts: exynos: Move fixed clocks under root node in Exynos3250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29.08.2020 19:25, Krzysztof Kozlowski wrote:
> The fixed clocks are kept under dedicated node fixed-rate-clocks, thus a
> fake "reg" was added.  This is not correct with dtschema as fixed-clock
> binding does not have a "reg" property:
>
>    arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
>   arch/arm/boot/dts/exynos3250.dtsi | 42 +++++++++++++------------------
>   1 file changed, 17 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> index d3fb45a56527..c67c70e46794 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -97,33 +97,25 @@
>   		};
>   	};
>   
> -	fixed-rate-clocks {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		xusbxti: clock@0 {
> -			compatible = "fixed-clock";
> -			reg = <0>;
> -			clock-frequency = <0>;
> -			#clock-cells = <0>;
> -			clock-output-names = "xusbxti";
> -		};
> +	xusbxti: clock-0 {
> +		compatible = "fixed-clock";
> +		clock-frequency = <0>;
> +		#clock-cells = <0>;
> +		clock-output-names = "xusbxti";
> +	};
>   
> -		xxti: clock@1 {
> -			compatible = "fixed-clock";
> -			reg = <1>;
> -			clock-frequency = <0>;
> -			#clock-cells = <0>;
> -			clock-output-names = "xxti";
> -		};
> +	xxti: clock-1 {
> +		compatible = "fixed-clock";
> +		clock-frequency = <0>;
> +		#clock-cells = <0>;
> +		clock-output-names = "xxti";
> +	};
>   
> -		xtcxo: clock@2 {
> -			compatible = "fixed-clock";
> -			reg = <2>;
> -			clock-frequency = <0>;
> -			#clock-cells = <0>;
> -			clock-output-names = "xtcxo";
> -		};
> +	xtcxo: clock-2 {
> +		compatible = "fixed-clock";
> +		clock-frequency = <0>;
> +		#clock-cells = <0>;
> +		clock-output-names = "xtcxo";
>   	};
>   
>   	pmu {

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux