The fixed clocks are kept under dedicated node fixed-rate-clocks, thus a
fake "reg" was added. This is not correct with dtschema as fixed-clock
binding does not have a "reg" property:
arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250.dtsi | 42 +++++++++++++------------------
1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index d3fb45a56527..c67c70e46794 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,33 +97,25 @@
};
};
- fixed-rate-clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- xusbxti: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xusbxti";
- };
+ xusbxti: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xusbxti";
+ };
- xxti: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xxti";
- };
+ xxti: clock-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xxti";
+ };
- xtcxo: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xtcxo";
- };
+ xtcxo: clock-2 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xtcxo";
};
pmu {
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
