On Fri, Aug 14, 2020 at 10:05 AM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
>
> On 12/08/2020 07:42, Tanmay Shah wrote:
> > From: Chandan Uddaraju <chandanu@xxxxxxxxxxxxxx>
> >
> > Add the needed DP PLL specific files to support
> > display port interface on msm targets.
>
> [skipped]
>
> > diff --git a/drivers/gpu/drm/msm/dp/dp_pll_private.h
> b/drivers/gpu/drm/msm/dp/dp_pll_private.h
> > new file mode 100644
> > index 000000000000..475ba6ed59ab
> > --- /dev/null
> > +++ b/drivers/gpu/drm/msm/dp/dp_pll_private.h
> > @@ -0,0 +1,98 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2016-2020, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +#ifndef __DP_PLL_10NM_H
> > +#define __DP_PLL_10NM_H
> > +
> > +#include "dp_pll.h"
> > +#include "dp_reg.h"
> > +
> > +#define DP_VCO_HSCLK_RATE_1620MHZDIV1000 1620000UL
> > +#define DP_VCO_HSCLK_RATE_2700MHZDIV1000 2700000UL
> > +#define DP_VCO_HSCLK_RATE_5400MHZDIV1000 5400000UL
> > +#define DP_VCO_HSCLK_RATE_8100MHZDIV1000 8100000UL
> > +
> > +#define NUM_DP_CLOCKS_MAX 6
> > +
> > +#define DP_PHY_PLL_POLL_SLEEP_US 500
> > +#define DP_PHY_PLL_POLL_TIMEOUT_US 10000
> > +
> > +#define DP_VCO_RATE_8100MHZDIV1000 8100000UL
> > +#define DP_VCO_RATE_9720MHZDIV1000 9720000UL
> > +#define DP_VCO_RATE_10800MHZDIV1000 10800000UL
> > +
> > +struct dp_pll_vco_clk {
> > + struct clk_hw hw;
> > + unsigned long rate; /* current vco rate */
> > + u64 min_rate; /* min vco rate */
> > + u64 max_rate; /* max vco rate */
> > + void *priv;
> > +};
> > +
> > +struct dp_pll_db {
>
> This struct should probably go into dp_pll_10nm.c. dp_pll_7nm.c, for
> example, will use slightly different structure.
Note that sboyd has a WIP series to move all of the pll code out to a
phy driver. If there is work already happening on 7nm support, it
might be better to go with the separate phy driver approach? I'm
still a bit undecided about whether to land the dp code initially with
the pll stuff in drm, and then continue refactoring to move to
separate phy driver upstream, or to strip out the pll code from the
beginning. If you/someone is working on 7nm support, then feedback
about which approach is easier is welcome.
https://lore.kernel.org/dri-devel/20200611091919.108018-1-swboyd@xxxxxxxxxxxx/
BR,
-R
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
