On Wed, Jul 29, 2020 at 03:27:30PM +0200, Guido Günther wrote: > Hi, > On Fri, Jul 24, 2020 at 12:07:34PM +0300, Laurentiu Palcu wrote: > > From: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > > > Add bindings for iMX8MQ Display Controller Subsystem. > > > > Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > --- > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 104 ++++++++++++++++++ > > 1 file changed, 104 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > new file mode 100644 > > index 000000000000..68e4635e4874 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > @@ -0,0 +1,104 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +# Copyright 2019 NXP > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"; > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > > + > > +title: iMX8MQ Display Controller Subsystem (DCSS) > > + > > +maintainers: > > + - Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > + > > +description: > > + > > + The DCSS (display controller sub system) is used to source up to three > > + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP > > + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 > > + image processing capabilities are included to provide a solution capable of > > + driving next generation high dynamic range displays. > > + > > +properties: > > + compatible: > > + const: nxp,imx8mq-dcss > > + > > + reg: > > + items: > > + - description: DCSS base address and size, up to IRQ steer start > > + - description: DCSS BLKCTL base address and size > > + > > + interrupts: > > + items: > > + - description: Context loader completion and error interrupt > > + - description: DTG interrupt used to signal context loader trigger time > > + - description: DTG interrupt for Vblank > > + > > + interrupt-names: > > + items: > > + - const: ctxld > > + - const: ctxld_kick > > + - const: vblank > > + > > + clocks: > > + items: > > + - description: Display APB clock for all peripheral PIO access interfaces > > + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL > > + - description: RTRAM clock > > + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI > > + - description: DTRC clock, needed by video decompressor > > + > > + clock-names: > > + items: > > + - const: apb > > + - const: axi > > + - const: rtrm > > + - const: pix > > + - const: dtrc > > + > > + assigned-clocks: > > + items: > > + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT > > + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM > > + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or > > + IMX8MQ_VIDEO_PLL1_REF_SEL > > + > > + assigned-clock-parents: > > + items: > > + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M > > + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M > > + - description: Phandle and clock specifier of IMX8MQ_CLK_27M > > + > > + assigned-clock-rates: > > + items: > > + - description: Must be 800 MHz > > + - description: Must be 400 MHz > > + > > + port: > > + type: object > > + description: > > + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > it would be nice to > > #include <dt-bindings/clock/imx8mq-clock.h> > > here... > > > + dcss: display-controller@32e00000 { > > + compatible = "nxp,imx8mq-dcss"; > > + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; > > + interrupts = <6>, <8>, <9>; > > + interrupt-names = "ctxld", "ctxld_kick", "vblank"; > > + interrupt-parent = <&irqsteer>; > > + clocks = <&clk 248>, <&clk 247>, <&clk 249>, > > + <&clk 254>,<&clk 122>; > > + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; > > + assigned-clocks = <&clk 107>, <&clk 109>, <&clk 266>; > > + assigned-clock-parents = <&clk 78>, <&clk 78>, <&clk 3>; > > so that clock names like IMX8MQ_CLK_DISP_AXI could be used to make this > even more useful. That's a good idea. I'll add it in. Thanks, laurentiu > > Cheers, > -- Guido > > > + assigned-clock-rates = <800000000>, > > + <400000000>; > > + port { > > + dcss_out: endpoint { > > + remote-endpoint = <&hdmi_in>; > > + }; > > + }; > > + }; > > + > > -- > > 2.23.0 > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
