Hi, On Fri, Jul 24, 2020 at 12:07:34PM +0300, Laurentiu Palcu wrote: > From: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > Add bindings for iMX8MQ Display Controller Subsystem. > > Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 104 ++++++++++++++++++ > 1 file changed, 104 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > new file mode 100644 > index 000000000000..68e4635e4874 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 NXP > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: iMX8MQ Display Controller Subsystem (DCSS) > + > +maintainers: > + - Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > + > +description: > + > + The DCSS (display controller sub system) is used to source up to three > + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP > + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 > + image processing capabilities are included to provide a solution capable of > + driving next generation high dynamic range displays. > + > +properties: > + compatible: > + const: nxp,imx8mq-dcss > + > + reg: > + items: > + - description: DCSS base address and size, up to IRQ steer start > + - description: DCSS BLKCTL base address and size > + > + interrupts: > + items: > + - description: Context loader completion and error interrupt > + - description: DTG interrupt used to signal context loader trigger time > + - description: DTG interrupt for Vblank > + > + interrupt-names: > + items: > + - const: ctxld > + - const: ctxld_kick > + - const: vblank > + > + clocks: > + items: > + - description: Display APB clock for all peripheral PIO access interfaces > + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL > + - description: RTRAM clock > + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI > + - description: DTRC clock, needed by video decompressor > + > + clock-names: > + items: > + - const: apb > + - const: axi > + - const: rtrm > + - const: pix > + - const: dtrc > + > + assigned-clocks: > + items: > + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT > + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM > + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or > + IMX8MQ_VIDEO_PLL1_REF_SEL > + > + assigned-clock-parents: > + items: > + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M > + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M > + - description: Phandle and clock specifier of IMX8MQ_CLK_27M > + > + assigned-clock-rates: > + items: > + - description: Must be 800 MHz > + - description: Must be 400 MHz > + > + port: > + type: object > + description: > + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. > + > +additionalProperties: false > + > +examples: > + - | it would be nice to #include <dt-bindings/clock/imx8mq-clock.h> here... > + dcss: display-controller@32e00000 { > + compatible = "nxp,imx8mq-dcss"; > + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; > + interrupts = <6>, <8>, <9>; > + interrupt-names = "ctxld", "ctxld_kick", "vblank"; > + interrupt-parent = <&irqsteer>; > + clocks = <&clk 248>, <&clk 247>, <&clk 249>, > + <&clk 254>,<&clk 122>; > + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; > + assigned-clocks = <&clk 107>, <&clk 109>, <&clk 266>; > + assigned-clock-parents = <&clk 78>, <&clk 78>, <&clk 3>; so that clock names like IMX8MQ_CLK_DISP_AXI could be used to make this even more useful. Cheers, -- Guido > + assigned-clock-rates = <800000000>, > + <400000000>; > + port { > + dcss_out: endpoint { > + remote-endpoint = <&hdmi_in>; > + }; > + }; > + }; > + > -- > 2.23.0 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
