On Wed, Jul 15, 2020 at 06:08:44PM +0200, Daniel Vetter wrote:
> On Wed, Jul 15, 2020 at 5:57 PM Melissa Wen <melissa.srw@xxxxxxxxx> wrote:
> >
> > On 07/15, Sidong Yang wrote:
> > > On Wed, Jul 15, 2020 at 10:17:56AM +0200, Daniel Vetter wrote:
> > > > On Tue, Jul 14, 2020 at 9:01 PM Melissa Wen <melissa.srw@xxxxxxxxx> wrote:
> > > > >
> > > > > On 07/14, Daniel Vetter wrote:
> > > > > > On Tue, Jul 14, 2020 at 07:39:42AM -0300, Melissa Wen wrote:
> > > > > > > On Tue, Jul 14, 2020 at 7:20 AM Melissa Wen <melissa.srw@xxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > On 07/13, Daniel Vetter wrote:
> > > > > > > > > On Fri, Jul 10, 2020 at 02:05:33PM -0300, Melissa Wen wrote:
> > > > > > > > > > On 07/02, Daniel Vetter wrote:
> > > > > > > > > > > On Wed, Jul 01, 2020 at 03:31:34PM +0000, Sidong Yang wrote:
> > > > > > > > > > > > there is an error when igt test is run continuously. vkms_atomic_commit_tail()
> > > > > > > > > > > > need to call drm_atomic_helper_wait_for_vblanks() for give up ownership of
> > > > > > > > > > > > vblank events. without this code, next atomic commit will not enable vblank
> > > > > > > > > > > > and raise timeout error.
> > > > > > > > > > > >
> > > > > > > > > > > > Signed-off-by: Sidong Yang <realwakka@xxxxxxxxx>
> > > > > > > > > > > > ---
> > > > > > > > > > > > drivers/gpu/drm/vkms/vkms_drv.c | 2 ++
> > > > > > > > > > > > 1 file changed, 2 insertions(+)
> > > > > > > > > > > >
> > > > > > > > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> > > > > > > > > > > > index 1e8b2169d834..10b9be67a068 100644
> > > > > > > > > > > > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > > > > > > > > > > > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > > > > > > > > > > > @@ -93,6 +93,8 @@ static void vkms_atomic_commit_tail(struct drm_atomic_state *old_state)
> > > > > > > > > > > > flush_work(&vkms_state->composer_work);
> > > > > > > > > > > > }
> > > > > > > > > > > >
> > > > > > > > > > > > + drm_atomic_helper_wait_for_vblanks(dev, old_state);
> > > > > > > > > > >
> > > > > > > > > > > Uh, we have a wait_for_flip_done right above, which should be doing
> > > > > > > > > > > exactly the same, but more precisely: Instead of just waiting for any
> > > > > > > > > > > vblank to happen, we wait for exactly the vblank corresponding to this
> > > > > > > > > > > atomic commit. So no races possible. If this is papering over some issue,
> > > > > > > > > > > then I think more debugging is needed.
> > > > > > > > > > >
> > > > > > > > > > > What exactly is going wrong here for you?
> > > > > > > > > >
> > > > > > > > > > Hi Daniel and Sidong,
> > > > > > > > > >
> > > > > > > > > > I noticed a similar issue when running the IGT test kms_cursor_crc. For
> > > > > > > > > > example, a subtest that passes on the first run (alpha-opaque) fails on
> > > > > > > > > > the second due to a kind of busy waiting in subtest preparation (the
> > > > > > > > > > subtest fails before actually running).
> > > > > > > > > >
> > > > > > > > > > In addition, in the same test, the dpms subtest started to fail since
> > > > > > > > > > the commit that change from wait_for_vblanks to wait_for_flip_done. By
> > > > > > > > > > reverting this commit, the dpms subtest passes again and the sequential
> > > > > > > > > > subtests return to normal.
> > > > > > > > > >
> > > > > > > > > > I am trying to figure out what's missing from using flip_done op on
> > > > > > > > > > vkms, since I am also interested in solving this problem and I
> > > > > > > > > > understand that the change for flip_done has been discussed in the past.
> > > > > > > > > >
> > > > > > > > > > Do you have any idea?
> > > > > > > > >
> > > > > > > > > Uh, not at all. This is indeed rather surprising ...
> > > > > > > > >
> > > > > > > > > What exactly is the failure mode when running a test the 2nd time? Full
> > > > > > > > > igt logs might give me an idea. But yeah this is kinda surprising.
> > > > > > > >
> > > > > > > > Hi Daniel,
> > > > > > > >
> > > > > > > > This is the IGT log of the 2nd run of kms_cursor_crc/alpha-opaque:
> > > > > > > >
> > > > > > > > IGT-Version: 1.25-NO-GIT (x86_64) (Linux: 5.8.0-rc2-DRM+ x86_64)
> > > > > > > > Force option used: Using driver vkms
> > > > > > > > Starting subtest: pipe-A-cursor-alpha-opaque
> > > > > > > > Timed out: Opening crc fd, and poll for first CRC.
> > > > > > > > Subtest pipe-A-cursor-alpha-opaque failed.
> > > > > > > > **** DEBUG ****
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: Virtual-1: set_pipe(A)
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: Virtual-1: Selecting pipe A
> > > > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1024, height=768, format=XR24(0x34325258), modifier=0x0, size=0)
> > > > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=4096)
> > > > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: Test requirement passed: cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS
> > > > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1024, height=768, format=XR24(0x34325258), modifier=0x0, size=0)
> > > > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=4096)
> > > > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: Test requirement passed: cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: plane_set_fb(37)
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: plane_set_size (1024x768)
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: fb_set_size(1024x768)
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: commit {
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: Virtual-1: SetCrtc pipe A, fb 37, src (0, 0), mode 1024x768
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: SetCursor pipe A, disabling
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0)
> > > > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: }
> > > > > > > > (kms_cursor_crc:2317) igt_debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
> > > > > > > > (kms_cursor_crc:2317) igt_debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
> > > > > > > > (kms_cursor_crc:2317) igt_debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
> > > > > > > > (kms_cursor_crc:2317) igt_core-INFO: Timed out: Opening crc fd, and poll for first CRC.
> > > > > > > > **** END ****
> > > > > > > > Subtest pipe-A-cursor-alpha-opaque: FAIL (10.017s)
> > > > > > > >
> > > > > > > > ---
> > > > > > > >
> > > > > > > > What I found was a timeout in the poll of
> > > > > > > > igt_debugfs/igt_pipe_crc_start() that in turn is called in the
> > > > > > > > prepare_crc() of kms_cursor_crc.
> > > > > > > >
> > > > > > > > Initially, I thought it was just a matter of timing for vblank and sent
> > > > > > > > a patch to IGT that solved the problem by calling igt_wait_for_vblank()
> > > > > > > > before the "start" op. But then I saw that the timeout also happens in a
> > > > > > > > similar way in the dpms subtest, which before the change to flip_done
> > > > > > > > was succeded.
> > > > > > > >
> > > > > > > > I still have doubts if it is or not a matter of timing...
> > > > > > >
> > > > > > > Just to complement, this is what I sent to IGT due to my first suspicion
> > > > > > > (still not reviewed): https://patchwork.freedesktop.org/series/78813/
> > > > > >
> > > > > > Hm, so the first patch makes some sense I think, that would indeed be a
> > > > > > test bug if we pile up the crc and leak the old one.
> > > > > >
> > > > > > The 2nd patch looks a bit like similar duct-tape like the kernel patch
> > > > > > here, somehow forcing a full vblank wait instead of just waiting for the
> > > > > > previos flip to complete fixes something. I'm just really confused what it
> > > > > > could be.
> > > > > >
> > > > > > We don't have multiple crtc in vkms, so it's likely not that, but it could
> > > > > > be that something goes wrong when we switch everything on. And after one
> > > > > > vblank, things are in sync and working ...
> > > > > >
> > > > > > Maybe to test this theory, adding a drm_crtc_wait_one_vblank() to the
> > > > > > crtc->enable function? If that fixes all these bugs, then we at least have
> > > > > > a better idea where this vblank wait is needed, and can try to investigate
> > > > > > a bit more focused why.
> > > > >
> > > > > Hey,
> > > > >
> > > > > I just checked this way (let me know if I made a mistake):
> > > > >
> > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > index ac85e17428f8..893d451fa966 100644
> > > > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > @@ -212,6 +212,7 @@ static void vkms_crtc_atomic_enable(struct drm_crtc *crtc,
> > > > > struct drm_crtc_state *old_state)
> > > > > {
> > > > > drm_crtc_vblank_on(crtc);
> > > > > + drm_crtc_wait_one_vblank(crtc);
> > > > > }
> > > > >
> > > > > and yes, in the case of kms_cursor_crc, it solves the failure of the 2nd
> > > > > run (ie, sequential run) and the failure of the cursor-dpms subtest.
> > > > >
> > > > > :)
> > > > > >
> > > > > > I don't think it's relevant for crtc->disable, since once the crtc is off,
> > > > > > vblanks stop doing anything. And since steady-state seems to work (at
> > > > > > least your igt patch only adds a vblank wait on setup), so I don't think
> > > > > > we need it for all flips ...
> > > > >
> > > > > I'm not sure if it's also related: I noticed that the cursor-suspend
> > > > > subtest has another pipe_crc_start that is also "requiring" another
> > > > > igt_wait_for_vblank before it.
> > > > >
> > > > > Describing a little more, the cursor-dpms and cursor-suspend subtests
> > > > > have the same setup structure [do_single_test()] besides the
> > > > > prepare_crtc, but in the case of cursor-suspend, even applying any of
> > > > > these "proposals" to wait for vblank, it still breaks due to timeout
> > > > > issues in a last pipe_crc_start. The cursor-suspend subtest only
> > > > > completes when we add another igt_wait_for_vblank also here.
> > > >
> > > > Excellent debug work, that's some solid information that limits the
> > > > scope of the bug. I think the next step would be to put a vblank wait
> > > > into the vkms crc setup function. If that papers over all the bugs
> > > > you've found, then that should give us pretty solid information about
> > > > what's breaking. And hopefully only a little bit of code to further
> > > > debug.
> > > >
> > > > Cheers, Daniel
> > >
> > > Hi, Daniel and Melissa.
> > > I tested the code that Daniel said.
> > >
> > > diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c
> > > index 4af2f19480f4..f7309b54b86a 100644
> > > --- a/drivers/gpu/drm/vkms/vkms_composer.c
> > > +++ b/drivers/gpu/drm/vkms/vkms_composer.c
> > > @@ -239,6 +239,7 @@ int vkms_set_crc_source(struct drm_crtc *crtc, const char *src_name)
> > > bool enabled = false;
> > > int ret = 0;
> > >
> > > + //drm_crtc_wait_one_vblank(crtc);
> > > ret = vkms_crc_parse_source(src_name, &enabled);
> > >
> > > spin_lock_irq(&out->lock);
> > >
> > > and It solves all problem. I traced this code and it enable vblank in set_crc_source
> > >
> > > 0) | vkms_set_crc_source [vkms]() {
> > > 0) 1.687 us | vkms_enable_vblank [vkms]();
> > > 0) 0.165 us | vkms_get_vblank_timestamp [vkms]();
> > >
> > > before this code, it enable vblank by drm_atomic_vblank_get() in crtc_atomic_flush.
> > >
> > > 0) | vkms_atomic_commit_tail [vkms]() {
> > > 0) 0.574 us | vkms_crtc_atomic_begin [vkms]();
> > > 0) 0.487 us | vkms_plane_atomic_update [vkms]();
> > > 0) | vkms_crtc_atomic_flush [vkms]() {
> > > 0) 1.934 us | vkms_enable_vblank [vkms]();
> > > 0) 0.347 us | vkms_get_vblank_timestamp [vkms]();
> > > 0) 0.379 us | vkms_get_vblank_timestamp [vkms]();
> > > 0) 6.789 us | }
> > >
> > > I think there is some problem because wait_for_flip_done() wait for only affected crtc.
> > > but kms_cursor_crc only set cursor call and maybe wait_for_flip_done() assumes this call
> > > doesn't affact crtc.
> >
> > Hi,
> >
> > In addition to kms_cursor_crc, did you see this timeout problem in some
> > other test?
>
> Hm tbh I'm not running tests, just throwing ideas for figuring out
> what's going on your way :-)
>
> > I saw similar, but even more strange behavior in kms_pipe_crc_basic. In
> > the case of this test, when I load the vkms module and run the first
> > subtest related to crc capture (read-crc-pipe), the first execution is
> > obstructed by this kind of timeout, but from then on everything goes
> > back to normal. If I unload and load the vkms again, the weird situation
> > repeats.
> >
> > I just noticed in dmesg that, as soon as we load the module, the
> > first subtest that requires a vblank will trigger a warning - but that
> > happens for any IGT test:
> >
> > [ 892.520876] [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 0
> > [ 897.209654] [IGT] kms_pipe_crc_basic: executing
> > [ 897.224316] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
> > [ 897.229659] ------------[ cut here ]------------
> > [ 897.229661] WARNING: CPU: 0 PID: 1339 at
> > drivers/gpu/drm/vkms/vkms_crtc.c:91 vkms_get_vblank_timestamp+0x46/0x50
> > [vkms]
>
> If I'm looking at this correctly it's the below warning:
>
> if (WARN_ON(*vblank_time == vblank->time))
> return true;
>
> It's not exactly line 91, so maybe I got something wrong, pls double
> check, ping me on irc if you need help with decoding function
> addresses and stuff like that.
>
> So this would mean that for a given vblank interval we've already
> updated vblank->time, but then somehow we process it again. From the
> backtrace this happens when we enable the output, so another
> indication that something in our vblank enabling is wrong.
>
> A reasonable conjecture (but until we have a bugfix can't exclude it
> fully yet) is that this might be caused by the same underlying issue
> where somehow the very first crc is getting stuck. Here we have an
> inconsistency with the very first vblank timestamp.
>
> So something is fishy with how we are getting vblanks going. But not
> really any idea what or why ... Maybe try to trace when/how
> vblank->time is updated (with backtraces) and try to figure out why
> that is causing the first crc capture to get stuck if we don't do a
> vblank wait first.
>
> Very interesting debug story, that's for sure :-)
>
> Cheers, Daniel
>
> > [ 897.229661] Modules linked in: vkms drm_kms_helper syscopyarea
> > sysfillrect sysimgblt fb_sys_fops cec drm backlight md4 cmac nls_utf8
> > cifs libdes dns_resolver fscache libarc4 ppdev input_leds joydev
> > parport_pc mousedev pcspkr serio_raw parport evdev qemu_fw_cfg intel_agp
> > mac_hid intel_gtt agpgart ip_tables x_tables ext4 crc32c_generic crc16
> > mbcache jbd2 sr_mod sd_mod cdrom ata_generic pata_acpi ata_piix psmouse
> > atkbd libps2 libata scsi_mod e1000 i2c_piix4 floppy i8042 serio [last
> > unloaded: syscopyarea]
> > [ 897.229679] CPU: 0 PID: 1339 Comm: kms_pipe_crc_ba Tainted: G W 5.8.0-rc2-DRM-MISC+ #103
> > [ 897.229679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
> > [ 897.229680] RIP: 0010:vkms_get_vblank_timestamp+0x46/0x50 [vkms]
> > [ 897.229681] Code: 19 00 00 48 c1 e0 05 48 03 86 48 03 00 00 48 89 0a
> > 48 39 88 20 01 00 00 74 10 48 2b 8e 18 1a 00 00 b8 01 00 00 00 48 89 0a
> > c3 <0f> 0b b8 01 00 00 00 c3 66 90 0f 1f 44 00 00 48 81 c7 f0 0a 00 00
> > [ 897.229681] RSP: 0018:ffffa83b80507af8 EFLAGS: 00010046
> > [ 897.229682] RAX: ffff96673bf59c28 RBX: ffffa83b80507b38 RCX: 0000000000000000
> > [ 897.229683] RDX: ffffa83b80507b38 RSI: ffff96673cb12000 RDI: ffff96673cb12ee8
> > [ 897.229684] RBP: ffff96673cb12000 R08: 00000000de89d0ca R09: 0000000000000000
> > [ 897.229684] R10: 0000000000080000 R11: 0000000000000000 R12: 0000000000000000
> > [ 897.229685] R13: 0000000000000000 R14: ffff96673cb12350 R15: ffff966733ebf5f0
> > [ 897.229685] FS: 00007f18c863f180(0000) GS:ffff96673ec00000(0000) knlGS:0000000000000000
> > [ 897.229686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 897.229686] CR2: 00007f18c8357000 CR3: 000000003c9b0000 CR4: 00000000000006f0
> > [ 897.229687] Call Trace:
> > [ 897.229687] drm_get_last_vbltimestamp+0xaa/0xc0 [drm]
> > [ 897.229688] drm_reset_vblank_timestamp+0x5b/0xd0 [drm]
> > [ 897.229688] drm_crtc_vblank_on+0x88/0x140 [drm]
> > [ 897.229689] drm_atomic_helper_commit_modeset_enables+0x1d2/0x220 [drm_kms_helper]
> > [ 897.229689] vkms_atomic_commit_tail+0x33/0xb0 [vkms]
> > [ 897.229690] commit_tail+0x94/0x130 [drm_kms_helper]
> > [ 897.229690] drm_atomic_helper_commit+0x132/0x160 [drm_kms_helper]
> > [ 897.229691] drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
> > [ 897.229691] drm_mode_setcrtc+0x1dd/0x6d0 [drm]
> > [ 897.229692] ? drm_mode_getcrtc+0x180/0x180 [drm]
> > [ 897.229692] drm_ioctl_kernel+0xad/0x100 [drm]
> > [ 897.229693] drm_ioctl+0x20c/0x3a0 [drm]
> > [ 897.229693] ? drm_mode_getcrtc+0x180/0x180 [drm]
> > [ 897.229693] ? __task_pid_nr_ns+0x6b/0xd0
> > [ 897.229694] ksys_ioctl+0x87/0xc0
> > [ 897.229694] __x64_sys_ioctl+0x16/0x20
> > [ 897.229695] do_syscall_64+0x4d/0x90
> > [ 897.229695] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > [ 897.229696] RIP: 0033:0x7f18ca3ed457
> > [ 897.229696] Code: Bad RIP value.
> > [ 897.229696] RSP: 002b:00007ffd96a276e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> > [ 897.229698] RAX: ffffffffffffffda RBX: 00007ffd96a27720 RCX: 00007f18ca3ed457
> > [ 897.229698] RDX: 00007ffd96a27720 RSI: 00000000c06864a2 RDI: 0000000000000003
> > [ 897.229699] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 000055dec3bdb318
> > [ 897.229699] R10: 0000000000000000 R11: 0000000000000246 R12: 000055dec3bdb310
> > [ 897.229700] R13: 0000000000000003 R14: 000055dec3bd9780 R15: 0000000000000025
> > [ 897.229700] ---[ end trace e909a3abdb957d23 ]---
> > [ 907.222149] [IGT] kms_pipe_crc_basic: exiting, ret=98
> > [ 919.725223] [IGT] kms_pipe_crc_basic: executing
> > [ 919.756611] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
> > [ 919.949258] [IGT] kms_pipe_crc_basic: exiting, ret=0
> > [ 921.000821] [IGT] kms_pipe_crc_basic: executing
> > [ 921.014152] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
> > [ 921.181640] [IGT] kms_pipe_crc_basic: exiting, ret=0
> > [ 922.049606] [IGT] kms_pipe_crc_basic: executing
> > [ 922.073160] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
> > [ 922.247318] [IGT] kms_pipe_crc_basic: exiting, ret=0
> > [ 926.948820] [IGT] kms_pipe_crc_basic: executing
> > [ 926.961950] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
> > [ 927.127187] [IGT] kms_pipe_crc_basic: exiting, ret=0
> >
> > My point is this warning appears to "block" execution only in the case
> > of kms_pipe_crc_basic. And then, with this drm_crtc_wait_one_vblank in
> > set_crc, this problem stops happening also here.
> >
> > On the other hand, I also saw that wait_one_vblank changed the result of
> > some kms_plane subtests (since they call igt_pipe_crc_start), but it
> > does not affect kms_flip. I mean, I'm trying to understand all of this
> > better, but it seems focused on this moment to start capturing of crc.
> >
> > Melissa
> > >
> > > I'll keep trace this problem.
> > > Thanks.
> > > -Sidong
> > >
> > > > >
> > > > > >
> > > > > > Stil confused what's going on here.
> > > > > > -Daniel
> > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > >
> > > > > > > > Melissa
> > > > > > > > >
> > > > > > > > > Also happy to chat on irc for debugging ideas, that might be faster (I'm
> > > > > > > > > danvet on #dri-devel on freenode).
> > > > > > > > > -Daniel
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Melissa
> > > > > > > > > >
> > > > > > > > > > > -Daniel
> > > > > > > > > > >
> > > > > > > > > > > > +
> > > > > > > > > > > > drm_atomic_helper_cleanup_planes(dev, old_state);
> > > > > > > > > > > > }
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > 2.17.1
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Daniel Vetter
> > > > > > > > > > > Software Engineer, Intel Corporation
> > > > > > > > > > > http://blog.ffwll.ch
> > > > > > > > > > > _______________________________________________
> > > > > > > > > > > dri-devel mailing list
> > > > > > > > > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Daniel Vetter
> > > > > > > > > Software Engineer, Intel Corporation
> > > > > > > > > http://blog.ffwll.ch
> > > > > > > _______________________________________________
> > > > > > > dri-devel mailing list
> > > > > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > > > >
> > > > > > --
> > > > > > Daniel Vetter
> > > > > > Software Engineer, Intel Corporation
> > > > > > http://blog.ffwll.ch
> > > > > _______________________________________________
> > > > > dri-devel mailing list
> > > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > >
> > > >
> > > >
> > > > --
> > > > Daniel Vetter
> > > > Software Engineer, Intel Corporation
> > > > http://blog.ffwll.ch
Hi, Daniel and Melissa
I tested some code for this problem trying to find the code that make problem in igt test.
kms_cursor_crc test in igt test has 3 steps (preparation, test, cleanup). I check each steps
and I found that without cleanup step, the problem solved.
In cleanup step, igt test code seems like this.
drmModeSetCrtc(display->drm_fd, crtc_id, 0 /* fb_id */, 0,
0 /* x, y */, NULL /* connector */, 0, NULL /* mode */)
I commented out this function call and there is no problem in executing tests repeatedly.
I'm trying to find out what's happen in this call. but don't know until now
I hope this information help to solve the problem.
Thanks.
-Sidong
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
