Re: [PATCH v2] drm: msm: a6xx: fix gpu failure after system resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 17, 2020 at 08:04:18PM +0530, Akhil P Oommen wrote:
> On targets where GMU is available, GMU takes over the ownership of GX GDSC
> during its initialization. So, move the refcount-get on GX PD before we
> initialize the GMU. This ensures that nobody can collapse the GX GDSC
> once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
> during GPU wake up during a system resume.

> Signed-off-by: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxx>
> Reported-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

The Signed-off-by needs to be at the end but I think Rob can do that for you.

Reviewed-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>

> ---
> Changes from v1:
> - Reworded the commit text
> - Added Reported-by & Tested-by tags
> 
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> index 21e77d6..1d33020 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> @@ -854,10 +854,19 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
>  	/* Turn on the resources */
>  	pm_runtime_get_sync(gmu->dev);
>  
> +	/*
> +	 * "enable" the GX power domain which won't actually do anything but it
> +	 * will make sure that the refcounting is correct in case we need to
> +	 * bring down the GX after a GMU failure
> +	 */
> +	if (!IS_ERR_OR_NULL(gmu->gxpd))
> +		pm_runtime_get_sync(gmu->gxpd);
> +
>  	/* Use a known rate to bring up the GMU */
>  	clk_set_rate(gmu->core_clk, 200000000);
>  	ret = clk_bulk_prepare_enable(gmu->nr_clocks, gmu->clocks);
>  	if (ret) {
> +		pm_runtime_put(gmu->gxpd);
>  		pm_runtime_put(gmu->dev);
>  		return ret;
>  	}
> @@ -903,19 +912,12 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
>  	else
>  		a6xx_hfi_set_freq(gmu, gmu->current_perf_index);
>  
> -	/*
> -	 * "enable" the GX power domain which won't actually do anything but it
> -	 * will make sure that the refcounting is correct in case we need to
> -	 * bring down the GX after a GMU failure
> -	 */
> -	if (!IS_ERR_OR_NULL(gmu->gxpd))
> -		pm_runtime_get(gmu->gxpd);
> -
>  out:
>  	/* On failure, shut down the GMU to leave it in a good state */
>  	if (ret) {
>  		disable_irq(gmu->gmu_irq);
>  		a6xx_rpmh_stop(gmu);
> +		pm_runtime_put(gmu->gxpd);
>  		pm_runtime_put(gmu->dev);
>  	}
>  
> -- 
> 2.7.4
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux