[PATCH v2] drm: msm: a6xx: fix gpu failure after system resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, move the refcount-get on GX PD before we
initialize the GMU. This ensures that nobody can collapse the GX GDSC
once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
during GPU wake up during a system resume.

Signed-off-by: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxx>
Reported-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes from v1:
- Reworded the commit text
- Added Reported-by & Tested-by tags

 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 21e77d6..1d33020 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -854,10 +854,19 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	/* Turn on the resources */
 	pm_runtime_get_sync(gmu->dev);
 
+	/*
+	 * "enable" the GX power domain which won't actually do anything but it
+	 * will make sure that the refcounting is correct in case we need to
+	 * bring down the GX after a GMU failure
+	 */
+	if (!IS_ERR_OR_NULL(gmu->gxpd))
+		pm_runtime_get_sync(gmu->gxpd);
+
 	/* Use a known rate to bring up the GMU */
 	clk_set_rate(gmu->core_clk, 200000000);
 	ret = clk_bulk_prepare_enable(gmu->nr_clocks, gmu->clocks);
 	if (ret) {
+		pm_runtime_put(gmu->gxpd);
 		pm_runtime_put(gmu->dev);
 		return ret;
 	}
@@ -903,19 +912,12 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	else
 		a6xx_hfi_set_freq(gmu, gmu->current_perf_index);
 
-	/*
-	 * "enable" the GX power domain which won't actually do anything but it
-	 * will make sure that the refcounting is correct in case we need to
-	 * bring down the GX after a GMU failure
-	 */
-	if (!IS_ERR_OR_NULL(gmu->gxpd))
-		pm_runtime_get(gmu->gxpd);
-
 out:
 	/* On failure, shut down the GMU to leave it in a good state */
 	if (ret) {
 		disable_irq(gmu->gmu_irq);
 		a6xx_rpmh_stop(gmu);
+		pm_runtime_put(gmu->gxpd);
 		pm_runtime_put(gmu->dev);
 	}
 
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux