[PATCH v2 3/8] soc: mediatek: cmdq: add write_s_mask function

[Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>]

add write_s_mask function in cmdq helper functions which
writes value contains in internal register to address
with mask and large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   |   23 +++++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |    1 +
 include/linux/soc/mediatek/mtk-cmdq.h    |   18 ++++++++++++++++++
 3 files changed, 42 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 880349b3f16c..550e9e7e3ff2 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -242,6 +242,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s);
 
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+			  u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+	struct cmdq_instruction inst = {};
+	int err;
+
+	inst.op = CMDQ_CODE_MASK;
+	inst.mask = ~mask;
+	err = cmdq_pkt_append_command(pkt, inst);
+	if (err < 0)
+		return err;
+
+	inst.mask = 0;
+	inst.op = CMDQ_CODE_WRITE_S_MASK;
+	inst.src_t = CMDQ_REG_TYPE;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.src_reg = src_reg_idx;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 1f76cfedb16d..90d1d8e64412 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -61,6 +61,7 @@ enum cmdq_code {
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
 	CMDQ_CODE_WRITE_S = 0x90,
+	CMDQ_CODE_WRITE_S_MASK = 0x91,
 	CMDQ_CODE_LOGIC = 0xa0,
 };
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 9b0c57a0063d..53230341bf94 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -122,6 +122,24 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 		     u16 addr_low, u16 src_reg_idx);
 
 /**
+ * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @src_reg_idx:	the CMDQ internal register ID which cache source value
+ * @mask:	the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+			  u16 addr_low, u16 src_reg_idx, u32 mask);
+
+/**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
  * @event:	the desired event type to "wait and CLEAR"
-- 
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel