The LVDS controller can invert the polarity / lanes of the LVDS output. The default polarity causes some issues on some panels. However, U-Boot has always used the opposite polarity without any reported issue, and the only currently supported LVDS panel in-tree (the TBS A711) seems to be able to work with both settings. Let's just use the same polarity than U-Boot to be more consistent and hopefully support all the panels. Cc: Ondrej Jirman <megous@xxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 359b56e43b83..e44635ebd510 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -474,9 +474,7 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | SUN4I_TCON0_BASIC2_V_BACKPORCH(bp)); - reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | - SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | - SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0; if (sun4i_tcon_get_pixel_depth(encoder) == 24) reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; else -- 2.26.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
