Hi Sam, On Sat, Jun 27, 2020 at 09:55:39PM +0200, Sam Ravnborg wrote: > Hi Liu, > > thanks for the notice. > > Laurent, I trust you will take a look and resolve this. I've just reviewed Liu's patches (and CC'ed you on 2/2). > On Thu, Jun 25, 2020 at 04:48:01PM +0800, Liu Ying wrote: > > On Tue, 2020-06-23 at 20:55 +0200, Sam Ravnborg wrote: > >> On Tue, May 26, 2020 at 04:14:38AM +0300, Laurent Pinchart wrote: > >>> Hello, > >>> > >>> This patch series converts the R-Car DU driver to use the DRM bridge > >>> connector helper drm_bridge_connector_init(). > >>> > >>> The bulk of the series is conversion of the adv7511, simple-bridge, > >>> rcar-lbds and dw-hdmi drivers to make connector creation optional > >>> (through the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag). > >>> > >>> The series starts with the adv7511 driver, previously posted as "[PATCH > >>> 0/4] drm: bridge: adv7511: Enable usage with DRM bridge connector > >>> helper" ([1]). Patches 01/27 to 04/27 incorporate all the received > >>> review comments. > >>> > >>> The next three patches address the simple-bridge driver, previously > >>> posted as "[PATCH 0/2] drm: bridge: simple-bridge: Enable usage with DRM > >>> bridge connector helper". Patch 05/27 is an additional fix that stems > >>> from the review, and patches 06/27 and 07/27 incorporate all the > >>> received review comments. > >>> > >>> Patch 08/27 is a new patch that addresses the rcar-lvds driver. Instead > >>> of implementing direct support for DRM_BRIDGE_ATTACH_NO_CONNECTOR, it > >>> simply removes code that shouldn't have been in the driver in the first > >>> place by switching to the panel bridge helper. > >>> > >>> Patches 09/27 to 22/27 then address the dw-hdmi driver. That's a more > >>> sizeable rework, due to the fact that the driver implements a mid- layer > >>> for platform-specific glue, with the internal drm_connector being used > >>> throughout the whole code. There's no rocket science there, but patch > >>> 10/27 should be noted for adding a new argument to the > >>> drm_bridge_funcs.mode_valid() function. Please see individual patches > >>> for details. > >>> > >>> Patch 23/27 adds support to the dw-hdmi driver to attach to a downstream > >>> bridge if one is specified in DT. As the DT port number corresponding to > >>> the video output differs between platforms that integrate the dw- hdmi > >>> (some of them even don't have a video output port, which should probably > >>> be fixed, but that's out of scope for this series), the port number has > >>> to be specified by the platform glue layer. Patch 24/27 does so for the > >>> R-Car dw-hdmi driver. > >>> > >>> Patch 25/27 is a drive-by fix for an error path issue in the rcar- du > >>> driver. Patch 26/27 finally makes use of the drm_bridge_connector_init() > >>> helper. > >>> > >>> Unfortunately, this breaks the VGA output on R-Car Gen3 platforms. On > >>> those platforms, the VGA DDC lines are not connected, and there is no > >>> mean for software to detect the VGA output connection status. When the > >>> simple-bridge driver creates a connector, it automatically adds default > >>> modes when no DDC is available. This behavious is also present int the > >>> DRM probe helper drm_helper_probe_single_connector_modes(), but only > >>> when the connector status is connector_status_connected. As the driver > >>> (rightfully) reports connector_status_unconnected, no modes are added. > >>> Patch 27/27 fixes this issue by extending addition of default modes in > >>> drm_helper_probe_single_connector_modes() when the output status is > >>> unknown. An alternative approach would be to implement this behaviour in > >>> the bridge connector helper (drm_bridge_connector.c). > >>> > >>> All the modified drivers have been compile-tested, and the series has > >>> been tested on a Renesas R-Car Salvator-XS board with the VGA, HDMI and > >>> LVDS outputs. > >>> > >>> [1] > >>> https://lore.kernel.org/dri-devel/20200409004610.12346-1-laurent.pinchart+renesas@xxxxxxxxxxxxxxxx/ > >>> [2] > >>> https://lore.kernel.org/dri-devel/20200409003636.11792-1-laurent.pinchart+renesas@xxxxxxxxxxxxxxxx/ > >> > >> As we briefly discussed on IRC the first 21 patches are now applied to > >> drm-misc-next. > > > > I see patch '[22/27] drm: bridge: dw-hdmi: Make connector creation > > optional' is applied to drm-misc-next. > > That patch would introduce an uninitialized mutex accessing issue as I > > mentioned in the patch[1]. And, the patch intends to fix the issue in > > the first place. > > > > [1] https://patchwork.freedesktop.org/patch/370560/ > > > >> The rcar-du specific patches was left out and the last patch was > >> likewise not applied in this round- mostly because it was the coming > >> after several rcar-du patches and I was not sure if there was some > >> dependencies to consider. > >> > >> With this set in we have more examples in the tree how to do proper > >> bridges which is good. > >> > >> While applying the new r-bs was ofc added. > >> > >>> Laurent Pinchart (27): > >>> drm: bridge: adv7511: Split EDID read to a separate function > >>> drm: bridge: adv7511: Split connector creation to a separate function > >>> drm: bridge: adv7511: Implement bridge connector operations > >>> drm: bridge: adv7511: Make connector creation optional > >>> drm: bridge: Return NULL on error from drm_bridge_get_edid() > >>> drm: bridge: simple-bridge: Delegate operations to next bridge > >>> drm: bridge: simple-bridge: Make connector creation optional > >>> drm: rcar-du: lvds: Convert to DRM panel bridge helper > >>> drm: edid: Constify connector argument to infoframe functions > >>> drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid() > >>> drm: bridge: dw-hdmi: Pass private data pointer to .mode_valid() > >>> drm: bridge: dw-hdmi: Pass private data pointer to .configure_phy() > >>> drm: bridge: dw-hdmi: Remove unused field from dw_hdmi_plat_data > >>> drm: meson: dw-hdmi: Use dw_hdmi context to replace hack > >>> drm: bridge: dw-hdmi: Pass drm_display_info to .mode_valid() > >>> drm: bridge: dw-hdmi: Constify mode argument to dw_hdmi_phy_ops > >>> .init() > >>> drm: bridge: dw-hdmi: Constify mode argument to internal functions > >>> drm: bridge: dw-hdmi: Pass drm_display_info to dw_hdmi_support_scdc() > >>> drm: bridge: dw-hdmi: Split connector creation to a separate function > >>> drm: bridge: dw-hdmi: Store current connector in struct dw_hdmi > >>> drm: bridge: dw-hdmi: Pass drm_connector to internal functions as > >>> needed > >>> drm: bridge: dw-hdmi: Make connector creation optional > >>> drm: bridge: dw-hdmi: Attach to next bridge if available > >>> drm: rcar-du: dw-hdmi: Set output port number > >>> drm: rcar-du: Fix error handling in rcar_du_encoder_init() > >>> drm: rcar-du: Use drm_bridge_connector_init() helper > >>> drm: Add default modes for connectors in unknown state > >>> > >>> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 159 +++++--- > >>> .../drm/bridge/analogix/analogix-anx6345.c | 1 + > >>> .../drm/bridge/analogix/analogix-anx78xx.c | 1 + > >>> drivers/gpu/drm/bridge/cdns-dsi.c | 1 + > >>> drivers/gpu/drm/bridge/chrontel-ch7033.c | 1 + > >>> drivers/gpu/drm/bridge/nwl-dsi.c | 1 + > >>> drivers/gpu/drm/bridge/sii9234.c | 1 + > >>> drivers/gpu/drm/bridge/sil-sii8620.c | 1 + > >>> drivers/gpu/drm/bridge/simple-bridge.c | 113 +++--- > >>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 357 ++++++++++++------ > >>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 + > >>> drivers/gpu/drm/bridge/tc358767.c | 1 + > >>> drivers/gpu/drm/bridge/tc358768.c | 1 + > >>> drivers/gpu/drm/bridge/thc63lvd1024.c | 1 + > >>> drivers/gpu/drm/bridge/ti-tfp410.c | 11 +- > >>> drivers/gpu/drm/drm_atomic_helper.c | 3 +- > >>> drivers/gpu/drm/drm_bridge.c | 10 +- > >>> drivers/gpu/drm/drm_edid.c | 12 +- > >>> drivers/gpu/drm/drm_probe_helper.c | 7 +- > >>> drivers/gpu/drm/i2c/tda998x_drv.c | 1 + > >>> drivers/gpu/drm/imx/dw_hdmi-imx.c | 6 +- > >>> drivers/gpu/drm/meson/meson_dw_hdmi.c | 34 +- > >>> drivers/gpu/drm/omapdrm/dss/dpi.c | 1 + > >>> drivers/gpu/drm/omapdrm/dss/sdi.c | 1 + > >>> drivers/gpu/drm/omapdrm/dss/venc.c | 1 + > >>> drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 26 +- > >>> drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c | 7 +- > >>> drivers/gpu/drm/rcar-du/rcar_lvds.c | 124 +----- > >>> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 6 +- > >>> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 6 +- > >>> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 3 +- > >>> drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 3 +- > >>> include/drm/bridge/dw_hdmi.h | 28 +- > >>> include/drm/drm_bridge.h | 3 + > >>> include/drm/drm_edid.h | 6 +- > >>> include/drm/drm_modeset_helper_vtables.h | 8 +- > >>> 36 files changed, 541 insertions(+), 406 deletions(-) -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
