Hi Sam, On Tue, 2020-06-23 at 20:55 +0200, Sam Ravnborg wrote: > Hi Laurent. > > On Tue, May 26, 2020 at 04:14:38AM +0300, Laurent Pinchart wrote: > > Hello, > > > > This patch series converts the R-Car DU driver to use the DRM > > bridge > > connector helper drm_bridge_connector_init(). > > > > The bulk of the series is conversion of the adv7511, simple-bridge, > > rcar-lbds and dw-hdmi drivers to make connector creation optional > > (through the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag). > > > > The series starts with the adv7511 driver, previously posted as > > "[PATCH > > 0/4] drm: bridge: adv7511: Enable usage with DRM bridge connector > > helper" ([1]). Patches 01/27 to 04/27 incorporate all the received > > review comments. > > > > The next three patches address the simple-bridge driver, previously > > posted as "[PATCH 0/2] drm: bridge: simple-bridge: Enable usage > > with DRM > > bridge connector helper". Patch 05/27 is an additional fix that > > stems > > from the review, and patches 06/27 and 07/27 incorporate all the > > received review comments. > > > > Patch 08/27 is a new patch that addresses the rcar-lvds driver. > > Instead > > of implementing direct support for DRM_BRIDGE_ATTACH_NO_CONNECTOR, > > it > > simply removes code that shouldn't have been in the driver in the > > first > > place by switching to the panel bridge helper. > > > > Patches 09/27 to 22/27 then address the dw-hdmi driver. That's a > > more > > sizeable rework, due to the fact that the driver implements a mid- > > layer > > for platform-specific glue, with the internal drm_connector being > > used > > throughout the whole code. There's no rocket science there, but > > patch > > 10/27 should be noted for adding a new argument to the > > drm_bridge_funcs.mode_valid() function. Please see individual > > patches > > for details. > > > > Patch 23/27 adds support to the dw-hdmi driver to attach to a > > downstream > > bridge if one is specified in DT. As the DT port number > > corresponding to > > the video output differs between platforms that integrate the dw- > > hdmi > > (some of them even don't have a video output port, which should > > probably > > be fixed, but that's out of scope for this series), the port number > > has > > to be specified by the platform glue layer. Patch 24/27 does so for > > the > > R-Car dw-hdmi driver. > > > > Patch 25/27 is a drive-by fix for an error path issue in the rcar- > > du > > driver. Patch 26/27 finally makes use of the > > drm_bridge_connector_init() > > helper. > > > > Unfortunately, this breaks the VGA output on R-Car Gen3 platforms. > > On > > those platforms, the VGA DDC lines are not connected, and there is > > no > > mean for software to detect the VGA output connection status. When > > the > > simple-bridge driver creates a connector, it automatically adds > > default > > modes when no DDC is available. This behavious is also present int > > the > > DRM probe helper drm_helper_probe_single_connector_modes(), but > > only > > when the connector status is connector_status_connected. As the > > driver > > (rightfully) reports connector_status_unconnected, no modes are > > added. > > Patch 27/27 fixes this issue by extending addition of default modes > > in > > drm_helper_probe_single_connector_modes() when the output status is > > unknown. An alternative approach would be to implement this > > behaviour in > > the bridge connector helper (drm_bridge_connector.c). > > > > All the modified drivers have been compile-tested, and the series > > has > > been tested on a Renesas R-Car Salvator-XS board with the VGA, HDMI > > and > > LVDS outputs. > > > > [1] > > https://lore.kernel.org/dri-devel/20200409004610.12346-1-laurent.pinchart+renesas@xxxxxxxxxxxxxxxx/ > > [2] > > https://lore.kernel.org/dri-devel/20200409003636.11792-1-laurent.pinchart+renesas@xxxxxxxxxxxxxxxx/ > > As we briefly discussed on IRC the first 21 patches are now applied > to > drm-misc-next. I see patch '[22/27] drm: bridge: dw-hdmi: Make connector creation optional' is applied to drm-misc-next. That patch would introduce an uninitialized mutex accessing issue as I mentioned in the patch[1]. And, the patch intends to fix the issue in the first place. [1] https://patchwork.freedesktop.org/patch/370560/ Regards, Liu Ying > The rcar-du specific patches was left out and the last patch was > likewise not applied in this round- mostly because it was the coming > after several rcar-du patches and I was not sure if there was some > dependencies to consider. > > With this set in we have more examples in the tree how to do proper > bridges which is good. > > While applying the new r-bs was ofc added. > > Sam > > > > > Laurent Pinchart (27): > > drm: bridge: adv7511: Split EDID read to a separate function > > drm: bridge: adv7511: Split connector creation to a separate > > function > > drm: bridge: adv7511: Implement bridge connector operations > > drm: bridge: adv7511: Make connector creation optional > > drm: bridge: Return NULL on error from drm_bridge_get_edid() > > drm: bridge: simple-bridge: Delegate operations to next bridge > > drm: bridge: simple-bridge: Make connector creation optional > > drm: rcar-du: lvds: Convert to DRM panel bridge helper > > drm: edid: Constify connector argument to infoframe functions > > drm: bridge: Pass drm_display_info to drm_bridge_funcs > > .mode_valid() > > drm: bridge: dw-hdmi: Pass private data pointer to .mode_valid() > > drm: bridge: dw-hdmi: Pass private data pointer to > > .configure_phy() > > drm: bridge: dw-hdmi: Remove unused field from dw_hdmi_plat_data > > drm: meson: dw-hdmi: Use dw_hdmi context to replace hack > > drm: bridge: dw-hdmi: Pass drm_display_info to .mode_valid() > > drm: bridge: dw-hdmi: Constify mode argument to dw_hdmi_phy_ops > > .init() > > drm: bridge: dw-hdmi: Constify mode argument to internal > > functions > > drm: bridge: dw-hdmi: Pass drm_display_info to > > dw_hdmi_support_scdc() > > drm: bridge: dw-hdmi: Split connector creation to a separate > > function > > drm: bridge: dw-hdmi: Store current connector in struct dw_hdmi > > drm: bridge: dw-hdmi: Pass drm_connector to internal functions as > > needed > > drm: bridge: dw-hdmi: Make connector creation optional > > drm: bridge: dw-hdmi: Attach to next bridge if available > > drm: rcar-du: dw-hdmi: Set output port number > > drm: rcar-du: Fix error handling in rcar_du_encoder_init() > > drm: rcar-du: Use drm_bridge_connector_init() helper > > drm: Add default modes for connectors in unknown state > > > > drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 159 +++++--- > > .../drm/bridge/analogix/analogix-anx6345.c | 1 + > > .../drm/bridge/analogix/analogix-anx78xx.c | 1 + > > drivers/gpu/drm/bridge/cdns-dsi.c | 1 + > > drivers/gpu/drm/bridge/chrontel-ch7033.c | 1 + > > drivers/gpu/drm/bridge/nwl-dsi.c | 1 + > > drivers/gpu/drm/bridge/sii9234.c | 1 + > > drivers/gpu/drm/bridge/sil-sii8620.c | 1 + > > drivers/gpu/drm/bridge/simple-bridge.c | 113 +++--- > > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 357 ++++++++++++ > > ------ > > drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 + > > drivers/gpu/drm/bridge/tc358767.c | 1 + > > drivers/gpu/drm/bridge/tc358768.c | 1 + > > drivers/gpu/drm/bridge/thc63lvd1024.c | 1 + > > drivers/gpu/drm/bridge/ti-tfp410.c | 11 +- > > drivers/gpu/drm/drm_atomic_helper.c | 3 +- > > drivers/gpu/drm/drm_bridge.c | 10 +- > > drivers/gpu/drm/drm_edid.c | 12 +- > > drivers/gpu/drm/drm_probe_helper.c | 7 +- > > drivers/gpu/drm/i2c/tda998x_drv.c | 1 + > > drivers/gpu/drm/imx/dw_hdmi-imx.c | 6 +- > > drivers/gpu/drm/meson/meson_dw_hdmi.c | 34 +- > > drivers/gpu/drm/omapdrm/dss/dpi.c | 1 + > > drivers/gpu/drm/omapdrm/dss/sdi.c | 1 + > > drivers/gpu/drm/omapdrm/dss/venc.c | 1 + > > drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 26 +- > > drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c | 7 +- > > drivers/gpu/drm/rcar-du/rcar_lvds.c | 124 +----- > > drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 6 +- > > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 6 +- > > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 3 +- > > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 3 +- > > include/drm/bridge/dw_hdmi.h | 28 +- > > include/drm/drm_bridge.h | 3 + > > include/drm/drm_edid.h | 6 +- > > include/drm/drm_modeset_helper_vtables.h | 8 +- > > 36 files changed, 541 insertions(+), 406 deletions(-) > > > > -- > > Regards, > > > > Laurent Pinchart > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
