Hi Stefan, On Sat, Jun 06, 2020 at 10:06:12AM +0200, Stefan Wahren wrote: > Hi Maxime, > > Am 05.06.20 um 16:35 schrieb Maxime Ripard: > > Hi Stefan, > > > > On Wed, Jun 03, 2020 at 07:32:30PM +0200, Stefan Wahren wrote: > >> Am 02.06.20 um 17:54 schrieb Maxime Ripard: > >>> On Wed, May 27, 2020 at 11:41:24AM -0700, Eric Anholt wrote: > >>>> On Wed, May 27, 2020 at 8:51 AM Maxime Ripard <maxime@xxxxxxxxxx> wrote: > >>>>> the vc4_hdmi driver has some custom structures to hold the data it needs to > >>>>> associate with the drm_encoder and drm_connector structures. > >>>>> > >>>>> However, it allocates them separately from the vc4_hdmi structure which > >>>>> makes it more complicated than it needs to be. > >>>>> > >>>>> Move those structures to be contained by vc4_hdmi and update the code > >>>>> accordingly. > >>>>> @@ -1220,7 +1219,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) > >>>>> struct drm_device *drm = dev_get_drvdata(master); > >>>>> struct vc4_dev *vc4 = drm->dev_private; > >>>>> struct vc4_hdmi *hdmi; > >>>>> - struct vc4_hdmi_encoder *vc4_hdmi_encoder; > >>>>> + struct drm_encoder *encoder; > >>>>> struct device_node *ddc_node; > >>>>> u32 value; > >>>>> int ret; > >>>>> @@ -1229,14 +1228,10 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) > >>>>> if (!hdmi) > >>>>> return -ENOMEM; > >>>>> > >>>>> - vc4_hdmi_encoder = devm_kzalloc(dev, sizeof(*vc4_hdmi_encoder), > >>>>> - GFP_KERNEL); > >>>>> - if (!vc4_hdmi_encoder) > >>>>> - return -ENOMEM; > >>>>> - vc4_hdmi_encoder->base.type = VC4_ENCODER_TYPE_HDMI0; > >>>>> - hdmi->encoder = &vc4_hdmi_encoder->base.base; > >>>>> - > >>>>> hdmi->pdev = pdev; > >>>>> + encoder = &hdmi->encoder.base.base; > >>>>> + encoder->base.type = VC4_ENCODER_TYPE_HDMI0; > >>>> Wait, does this patch build? > >>> All those patches were build tested, so yep > >>> > >>>> setting struct drm_encoder->base.type = VC4_* seems very wrong, when > >>>> previously we were setting struct vc4_hdmi_encoder->base.type (struct > >>>> vc4_encoder->type). > >>> So the structure layout now is that vc4_hdmi embeds vc4_hdmi_encoder as > >>> encoder. So &hdmi->encoder is a pointer to vc4_hdmi_encoder. > >>> vc4_hdmi_encoder's base is since that patch a struct vc4_encoder. and > >>> vc4_encoder's base is a drm_encoder. > >>> > >>> so encoder being a drm_encoder is correct there. > >>> > >>> However, drm_encoder's base is drm_mode_object that does have a type > >>> field, which is an uint32_t, which will accept a VC4_ENCODER_TYPE_* just > >>> fine... > >>> > >>> Now, drm_encoder_init will then kick in and call drm_mode_object_add > >>> which will override it to a proper value and since the clock select bit > >>> in the PV is the same for both HDMI0 and HDMI1, everything works just > >>> fine... > >>> > >>> Good catch, I'll fix it. And I guess it's a good indication we don't > >>> need a separate HDMI0 and HDMI1 encoder type. > >>> > >> FWIW this is the first patch which breaks X on my Raspberry Pi 3 B. > >> > >> Here are the bisect results: > >> > >> 587d6e4a529a8d807a5c0bae583dd432d77064d6 bad (black screen, no heartbeat) > >> > >> b0523c7b1c9d0edcd6c0fe6d2cb558a9ad5c60a8 good > >> > >> 2c6a651cac6359cb0244a40d3b7a14e72918f169 good > >> > >> 1705c3cb40906863ec0d24ee5ea5092f5ee2e994 bad (black screen, but heartbeat) > >> > >> 601527fea6bb226abd088a864e74b25368218e87 good > >> > >> 2165607ede34d229d0cbce916c70c7fb6c0337be good > >> > >> f094f388fc2df848227e2ae648df2c97872df42b good > >> > >> 020de18840a1075b2671736c6cc2e451030fad74 bad (black screen, but heartbeat) > >> > >> 4c4da3823e4d1a8189e96a59a79451fff372f70b good > >> > >> 020de18840a1075b2671736c6cc2e451030fad74 is the first bad commit > >> commit 020de18840a1075b2671736c6cc2e451030fad74 > >> Author: Maxime Ripard <maxime@xxxxxxxxxx> > >> Date: Mon Jan 6 17:17:29 2020 +0100 > >> > >> drm/vc4: hdmi: rework connectors and encoders > >> > >> the vc4_hdmi driver has some custom structures to hold the data it > >> needs to > >> associate with the drm_encoder and drm_connector structures. > >> > >> However, it allocates them separately from the vc4_hdmi structure which > >> makes it more complicated than it needs to be. > >> > >> Move those structures to be contained by vc4_hdmi and update the code > >> accordingly. > >> > >> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> > > So it looks like there was two issues on the Pi3. The first one was > > causing the timeouts (and therefore likely the black screen but > > heartbeat case you had) and I've fixed it. > > > > However, I can indeed reproduce the case with the black screen / no > > heartbeat you mentionned. My bisection however returns that it's the > > patch "drm/vc4: hdmi: Implement finer-grained hooks" that is at fault. > > I've pushed my updated branch, if you have some spare time, it would be > > great if you could confirm it on your Pi. > > yesterday i checked out your latest rpi4-kms branch, but i was still > facing similiar issues with my Raspberry Pi 3 and multi_v7_defconfig > (heartbeat stops, splashscreen freeze, heartbeat is abnormal fast). So i > tried to bisect but the offending commit didn't cause an issue the > second time. > > By accident i noticed that a simple reboot seems to hang for at least 8 > minutes (using b0523c7b1c9d0edcd the base of your branch). This usually > take a few seconds. So i consider this base on linux-next as too > unstable for reliable testing. > > Is it possible to rebase this on something more stable like linux-5.7 or > at least drm-misc-next? This should avoid chasing unrelated issues. I've rebased it on 5.7 here: https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git/log/?h=rpi4-kms-5.7 And it looks to be indeed an issue coming from next. That branch can start the desktop just fine on an RPi3 here. It would be great if you could confirm on your end. Thanks! Maxime
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
