Re: [PATCH 3/3] drm/ast: Use per-device logging macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sam

Am 11.06.20 um 21:24 schrieb Sam Ravnborg:
> Hi Thomas.
> On Thu, Jun 11, 2020 at 10:28:09AM +0200, Thomas Zimmermann wrote:
>> Converts the ast driver to drm_info() and drm_err(). No functional
>> changes are made.
>>
>> Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> 
> I hope you will later follow-up with a patch that introduces drm_WARN_*.

I only found DRM_INFO and DRM_ERROR calls. Did I miss any other warning
macros?

Best regards
Thomas

> 
> 	Sam
> 
>> ---
>>  drivers/gpu/drm/ast/ast_main.c | 34 +++++++++++++++++-----------------
>>  drivers/gpu/drm/ast/ast_mode.c |  8 ++++----
>>  drivers/gpu/drm/ast/ast_post.c |  2 +-
>>  drivers/gpu/drm/ast/ast_ttm.c  |  2 +-
>>  4 files changed, 23 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
>> index a2ef3d9077671..9063fdc9e8852 100644
>> --- a/drivers/gpu/drm/ast/ast_main.c
>> +++ b/drivers/gpu/drm/ast/ast_main.c
>> @@ -79,7 +79,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>>  					scu_rev)) {
>>  		/* We do, disable P2A access */
>>  		ast->config_mode = ast_use_dt;
>> -		DRM_INFO("Using device-tree for configuration\n");
>> +		drm_info(dev, "Using device-tree for configuration\n");
>>  		return;
>>  	}
>>  
>> @@ -101,7 +101,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>>  			/* P2A works, grab silicon revision */
>>  			ast->config_mode = ast_use_p2a;
>>  
>> -			DRM_INFO("Using P2A bridge for configuration\n");
>> +			drm_info(dev, "Using P2A bridge for configuration\n");
>>  
>>  			/* Read SCU7c (silicon revision register) */
>>  			ast_write32(ast, 0xf004, 0x1e6e0000);
>> @@ -112,7 +112,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>>  	}
>>  
>>  	/* We have a P2A bridge but it's disabled */
>> -	DRM_INFO("P2A bridge disabled, using default configuration\n");
>> +	drm_info(dev, "P2A bridge disabled, using default configuration\n");
>>  }
>>  
>>  static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>> @@ -128,7 +128,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>>  	 */
>>  	if (!ast_is_vga_enabled(dev)) {
>>  		ast_enable_vga(dev);
>> -		DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
>> +		drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
>>  		*need_post = true;
>>  	} else
>>  		*need_post = false;
>> @@ -144,36 +144,36 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>>  	/* Identify chipset */
>>  	if (dev->pdev->revision >= 0x40) {
>>  		ast->chip = AST2500;
>> -		DRM_INFO("AST 2500 detected\n");
>> +		drm_info(dev, "AST 2500 detected\n");
>>  	} else if (dev->pdev->revision >= 0x30) {
>>  		ast->chip = AST2400;
>> -		DRM_INFO("AST 2400 detected\n");
>> +		drm_info(dev, "AST 2400 detected\n");
>>  	} else if (dev->pdev->revision >= 0x20) {
>>  		ast->chip = AST2300;
>> -		DRM_INFO("AST 2300 detected\n");
>> +		drm_info(dev, "AST 2300 detected\n");
>>  	} else if (dev->pdev->revision >= 0x10) {
>>  		switch (scu_rev & 0x0300) {
>>  		case 0x0200:
>>  			ast->chip = AST1100;
>> -			DRM_INFO("AST 1100 detected\n");
>> +			drm_info(dev, "AST 1100 detected\n");
>>  			break;
>>  		case 0x0100:
>>  			ast->chip = AST2200;
>> -			DRM_INFO("AST 2200 detected\n");
>> +			drm_info(dev, "AST 2200 detected\n");
>>  			break;
>>  		case 0x0000:
>>  			ast->chip = AST2150;
>> -			DRM_INFO("AST 2150 detected\n");
>> +			drm_info(dev, "AST 2150 detected\n");
>>  			break;
>>  		default:
>>  			ast->chip = AST2100;
>> -			DRM_INFO("AST 2100 detected\n");
>> +			drm_info(dev, "AST 2100 detected\n");
>>  			break;
>>  		}
>>  		ast->vga2_clone = false;
>>  	} else {
>>  		ast->chip = AST2000;
>> -		DRM_INFO("AST 2000 detected\n");
>> +		drm_info(dev, "AST 2000 detected\n");
>>  	}
>>  
>>  	/* Check if we support wide screen */
>> @@ -248,13 +248,13 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>>  	/* Print stuff for diagnostic purposes */
>>  	switch(ast->tx_chip_type) {
>>  	case AST_TX_SIL164:
>> -		DRM_INFO("Using Sil164 TMDS transmitter\n");
>> +		drm_info(dev, "Using Sil164 TMDS transmitter\n");
>>  		break;
>>  	case AST_TX_DP501:
>> -		DRM_INFO("Using DP501 DisplayPort transmitter\n");
>> +		drm_info(dev, "Using DP501 DisplayPort transmitter\n");
>>  		break;
>>  	default:
>> -		DRM_INFO("Analog VGA only\n");
>> +		drm_info(dev, "Analog VGA only\n");
>>  	}
>>  	return 0;
>>  }
>> @@ -443,7 +443,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
>>  	 * and higher).
>>  	 */
>>  	if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
>> -		DRM_INFO("platform has no IO space, trying MMIO\n");
>> +		drm_info(dev, "platform has no IO space, trying MMIO\n");
>>  		ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
>>  	}
>>  
>> @@ -465,7 +465,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
>>  	if (ret)
>>  		goto out_free;
>>  	ast->vram_size = ast_get_vram_info(dev);
>> -	DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
>> +	drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
>>  		 ast->mclk, ast->dram_type,
>>  		 ast->dram_bus_width, ast->vram_size);
>>  
>> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
>> index 10211751182da..ff789f2db9fc8 100644
>> --- a/drivers/gpu/drm/ast/ast_mode.c
>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>> @@ -1104,7 +1104,7 @@ static int ast_connector_init(struct drm_device *dev)
>>  	connector = &ast_connector->base;
>>  	ast_connector->i2c = ast_i2c_create(dev);
>>  	if (!ast_connector->i2c)
>> -		DRM_ERROR("failed to add ddc bus for connector\n");
>> +		drm_err(dev, "failed to add ddc bus for connector\n");
>>  
>>  	drm_connector_init_with_ddc(dev, connector,
>>  				    &ast_connector_funcs,
>> @@ -1188,7 +1188,7 @@ int ast_mode_init(struct drm_device *dev)
>>  				       ARRAY_SIZE(ast_primary_plane_formats),
>>  				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
>>  	if (ret) {
>> -		DRM_ERROR("ast: drm_universal_plane_init() failed: %d\n", ret);
>> +		drm_err(dev, "ast: drm_universal_plane_init() failed: %d\n", ret);
>>  		return ret;
>>  	}
>>  	drm_plane_helper_add(&ast->primary_plane,
>> @@ -1200,7 +1200,7 @@ int ast_mode_init(struct drm_device *dev)
>>  				       ARRAY_SIZE(ast_cursor_plane_formats),
>>  				       NULL, DRM_PLANE_TYPE_CURSOR, NULL);
>>  	if (ret) {
>> -		DRM_ERROR("drm_universal_plane_failed(): %d\n", ret);
>> +		drm_err(dev, "drm_universal_plane_failed(): %d\n", ret);
>>  		return ret;
>>  	}
>>  	drm_plane_helper_add(&ast->cursor_plane,
>> @@ -1322,7 +1322,7 @@ static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev)
>>  	i2c->bit.getscl = get_clock;
>>  	ret = i2c_bit_add_bus(&i2c->adapter);
>>  	if (ret) {
>> -		DRM_ERROR("Failed to register bit i2c\n");
>> +		drm_err(dev, "Failed to register bit i2c\n");
>>  		goto out_free;
>>  	}
>>  
>> diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
>> index 226e1290227ad..c043fe7175530 100644
>> --- a/drivers/gpu/drm/ast/ast_post.c
>> +++ b/drivers/gpu/drm/ast/ast_post.c
>> @@ -2067,7 +2067,7 @@ void ast_post_chip_2500(struct drm_device *dev)
>>  		}
>>  
>>  		if (!ast_dram_init_2500(ast))
>> -			DRM_ERROR("DRAM init failed !\n");
>> +			drm_err(dev, "DRAM init failed !\n");
>>  
>>  		temp = ast_mindwm(ast, 0x1e6e2040);
>>  		ast_moutdwm(ast, 0x1e6e2040, temp | 0x40);
>> diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c
>> index fad34106083a8..9c3788a4c1c54 100644
>> --- a/drivers/gpu/drm/ast/ast_ttm.c
>> +++ b/drivers/gpu/drm/ast/ast_ttm.c
>> @@ -44,7 +44,7 @@ int ast_mm_init(struct ast_private *ast)
>>  		ast->vram_size);
>>  	if (IS_ERR(vmm)) {
>>  		ret = PTR_ERR(vmm);
>> -		DRM_ERROR("Error initializing VRAM MM; %d\n", ret);
>> +		drm_err(dev, "Error initializing VRAM MM; %d\n", ret);
>>  		return ret;
>>  	}
>>  
>> -- 
>> 2.26.2
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux