[PATCH 3/3] drm/ast: Use per-device logging macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Converts the ast driver to drm_info() and drm_err(). No functional
changes are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
---
 drivers/gpu/drm/ast/ast_main.c | 34 +++++++++++++++++-----------------
 drivers/gpu/drm/ast/ast_mode.c |  8 ++++----
 drivers/gpu/drm/ast/ast_post.c |  2 +-
 drivers/gpu/drm/ast/ast_ttm.c  |  2 +-
 4 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index a2ef3d9077671..9063fdc9e8852 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -79,7 +79,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
 					scu_rev)) {
 		/* We do, disable P2A access */
 		ast->config_mode = ast_use_dt;
-		DRM_INFO("Using device-tree for configuration\n");
+		drm_info(dev, "Using device-tree for configuration\n");
 		return;
 	}
 
@@ -101,7 +101,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
 			/* P2A works, grab silicon revision */
 			ast->config_mode = ast_use_p2a;
 
-			DRM_INFO("Using P2A bridge for configuration\n");
+			drm_info(dev, "Using P2A bridge for configuration\n");
 
 			/* Read SCU7c (silicon revision register) */
 			ast_write32(ast, 0xf004, 0x1e6e0000);
@@ -112,7 +112,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
 	}
 
 	/* We have a P2A bridge but it's disabled */
-	DRM_INFO("P2A bridge disabled, using default configuration\n");
+	drm_info(dev, "P2A bridge disabled, using default configuration\n");
 }
 
 static int ast_detect_chip(struct drm_device *dev, bool *need_post)
@@ -128,7 +128,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
 	 */
 	if (!ast_is_vga_enabled(dev)) {
 		ast_enable_vga(dev);
-		DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
+		drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
 		*need_post = true;
 	} else
 		*need_post = false;
@@ -144,36 +144,36 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
 	/* Identify chipset */
 	if (dev->pdev->revision >= 0x40) {
 		ast->chip = AST2500;
-		DRM_INFO("AST 2500 detected\n");
+		drm_info(dev, "AST 2500 detected\n");
 	} else if (dev->pdev->revision >= 0x30) {
 		ast->chip = AST2400;
-		DRM_INFO("AST 2400 detected\n");
+		drm_info(dev, "AST 2400 detected\n");
 	} else if (dev->pdev->revision >= 0x20) {
 		ast->chip = AST2300;
-		DRM_INFO("AST 2300 detected\n");
+		drm_info(dev, "AST 2300 detected\n");
 	} else if (dev->pdev->revision >= 0x10) {
 		switch (scu_rev & 0x0300) {
 		case 0x0200:
 			ast->chip = AST1100;
-			DRM_INFO("AST 1100 detected\n");
+			drm_info(dev, "AST 1100 detected\n");
 			break;
 		case 0x0100:
 			ast->chip = AST2200;
-			DRM_INFO("AST 2200 detected\n");
+			drm_info(dev, "AST 2200 detected\n");
 			break;
 		case 0x0000:
 			ast->chip = AST2150;
-			DRM_INFO("AST 2150 detected\n");
+			drm_info(dev, "AST 2150 detected\n");
 			break;
 		default:
 			ast->chip = AST2100;
-			DRM_INFO("AST 2100 detected\n");
+			drm_info(dev, "AST 2100 detected\n");
 			break;
 		}
 		ast->vga2_clone = false;
 	} else {
 		ast->chip = AST2000;
-		DRM_INFO("AST 2000 detected\n");
+		drm_info(dev, "AST 2000 detected\n");
 	}
 
 	/* Check if we support wide screen */
@@ -248,13 +248,13 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
 	/* Print stuff for diagnostic purposes */
 	switch(ast->tx_chip_type) {
 	case AST_TX_SIL164:
-		DRM_INFO("Using Sil164 TMDS transmitter\n");
+		drm_info(dev, "Using Sil164 TMDS transmitter\n");
 		break;
 	case AST_TX_DP501:
-		DRM_INFO("Using DP501 DisplayPort transmitter\n");
+		drm_info(dev, "Using DP501 DisplayPort transmitter\n");
 		break;
 	default:
-		DRM_INFO("Analog VGA only\n");
+		drm_info(dev, "Analog VGA only\n");
 	}
 	return 0;
 }
@@ -443,7 +443,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
 	 * and higher).
 	 */
 	if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
-		DRM_INFO("platform has no IO space, trying MMIO\n");
+		drm_info(dev, "platform has no IO space, trying MMIO\n");
 		ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
 	}
 
@@ -465,7 +465,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto out_free;
 	ast->vram_size = ast_get_vram_info(dev);
-	DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
+	drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
 		 ast->mclk, ast->dram_type,
 		 ast->dram_bus_width, ast->vram_size);
 
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 10211751182da..ff789f2db9fc8 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -1104,7 +1104,7 @@ static int ast_connector_init(struct drm_device *dev)
 	connector = &ast_connector->base;
 	ast_connector->i2c = ast_i2c_create(dev);
 	if (!ast_connector->i2c)
-		DRM_ERROR("failed to add ddc bus for connector\n");
+		drm_err(dev, "failed to add ddc bus for connector\n");
 
 	drm_connector_init_with_ddc(dev, connector,
 				    &ast_connector_funcs,
@@ -1188,7 +1188,7 @@ int ast_mode_init(struct drm_device *dev)
 				       ARRAY_SIZE(ast_primary_plane_formats),
 				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
-		DRM_ERROR("ast: drm_universal_plane_init() failed: %d\n", ret);
+		drm_err(dev, "ast: drm_universal_plane_init() failed: %d\n", ret);
 		return ret;
 	}
 	drm_plane_helper_add(&ast->primary_plane,
@@ -1200,7 +1200,7 @@ int ast_mode_init(struct drm_device *dev)
 				       ARRAY_SIZE(ast_cursor_plane_formats),
 				       NULL, DRM_PLANE_TYPE_CURSOR, NULL);
 	if (ret) {
-		DRM_ERROR("drm_universal_plane_failed(): %d\n", ret);
+		drm_err(dev, "drm_universal_plane_failed(): %d\n", ret);
 		return ret;
 	}
 	drm_plane_helper_add(&ast->cursor_plane,
@@ -1322,7 +1322,7 @@ static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev)
 	i2c->bit.getscl = get_clock;
 	ret = i2c_bit_add_bus(&i2c->adapter);
 	if (ret) {
-		DRM_ERROR("Failed to register bit i2c\n");
+		drm_err(dev, "Failed to register bit i2c\n");
 		goto out_free;
 	}
 
diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
index 226e1290227ad..c043fe7175530 100644
--- a/drivers/gpu/drm/ast/ast_post.c
+++ b/drivers/gpu/drm/ast/ast_post.c
@@ -2067,7 +2067,7 @@ void ast_post_chip_2500(struct drm_device *dev)
 		}
 
 		if (!ast_dram_init_2500(ast))
-			DRM_ERROR("DRAM init failed !\n");
+			drm_err(dev, "DRAM init failed !\n");
 
 		temp = ast_mindwm(ast, 0x1e6e2040);
 		ast_moutdwm(ast, 0x1e6e2040, temp | 0x40);
diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c
index fad34106083a8..9c3788a4c1c54 100644
--- a/drivers/gpu/drm/ast/ast_ttm.c
+++ b/drivers/gpu/drm/ast/ast_ttm.c
@@ -44,7 +44,7 @@ int ast_mm_init(struct ast_private *ast)
 		ast->vram_size);
 	if (IS_ERR(vmm)) {
 		ret = PTR_ERR(vmm);
-		DRM_ERROR("Error initializing VRAM MM; %d\n", ret);
+		drm_err(dev, "Error initializing VRAM MM; %d\n", ret);
 		return ret;
 	}
 
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux