Quoting dillon.minfei@xxxxxxxxx (2020-05-24 20:45:45) > From: dillon min <dillon.minfei@xxxxxxxxx> > > ltdc set clock rate crashed > 'post_div_data[]''s pll_num is PLL_I2S, PLL_SAI (number is 1,2). but, Please write "post_div_data[]'s" if it is possessive. "But" doesn't start a sentence. This is one sentence, not two. > as pll_num is offset of 'clks[]' input to clk_register_pll_div(), which > is FCLK, CLK_LSI, defined in 'include/dt-bindings/clock/stm32fx-clock.h' > so, this is a null object at the register time. > then, in ltdc's clock is_enabled(), enable(), will call to_clk_gate(). > will return a null object, cause kernel crashed. > need change pll_num to PLL_VCO_I2S, PLL_VCO_SAI for 'post_div_data[]' > > duplicated ltdc clock > 'stm32f429_gates[]' has a member 'ltdc' register to 'clk_core', but no > upper driver use it, ltdc driver use the lcd-tft defined in > 'stm32f429_aux_clk[]'. after system startup, as stm32f429_gates[]'s ltdc > enable_count is zero, so turn off by clk_disable_unused() I sort of follow this. Is this another patch? Seems like two things are going on here. > > Changes since V3: > 1 drop last wrong changes about 'CLK_IGNORE_UNUSED' patch > 2 fix PLL_SAI mismatch with PLL_VCO_SAI This change log goes under the --- below. > > Signed-off-by: dillon min <dillon.minfei@xxxxxxxxx> Any Fixes tag? _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
