On Tue, Apr 07, 2020 at 09:17:07PM +0530, Kiran Gunda wrote:
Convert the qcom-wled bindings from .txt to .yaml format.
Also replace PM8941 to WLED3 and PMI8998 to WLED4.
Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx>
Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
---
.../bindings/leds/backlight/qcom-wled.txt | 154
----------------
.../bindings/leds/backlight/qcom-wled.yaml | 201
+++++++++++++++++++++
2 files changed, 201 insertions(+), 154 deletions(-)
delete mode 100644
Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
create mode 100644
Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
diff --git
a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
new file mode 100644
index 0000000..770e780
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Qualcomm Technologies, Inc. WLED driver
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+ - Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
+
+description: |
+ WLED (White Light Emitting Diode) driver is used for controlling
display
+ backlight that is part of PMIC on Qualcomm Technologies, Inc.
reference
+ platforms. The PMIC is connected to the host processor via SPMI
bus.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8941-wled
+ - qcom,pmi8998-wled
+ - qcom,pm660l-wled
+
+ reg:
+ maxItems: 1
+
+ default-brightness:
+ description:
+ brightness value on boot.
+ minimum: 0
+ maximum: 4095
+ default: 2048
+
+ label: true
+
+ qcom,cs-out:
+ description:
+ enable current sink output.
+ This property is supported only for WLED3.
+ type: boolean
+
+ qcom,cabc:
+ description:
+ enable content adaptive backlight control.
+ type: boolean
+
+ qcom,ext-gen:
+ description:
+ use externally generated modulator signal to dim.
+ This property is supported only for WLED3.
+ type: boolean
+
+ qcom,current-limit:
+ description:
+ mA; per-string current limit.
+ This property is supported only for WLED3.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ default: 20
+ minimum: 0
+ maximum: 25
+ multipleOf: 1
No point in defining a multiple of 1.
+
+ qcom,current-limit-microamp:
+ description:
+ uA; per-string current limit.
+ default: 25
+ minimum: 0
+ maximum: 30000
+ multipleOf: 25
+
+ qcom,current-boost-limit:
+ description:
+ mA; boost current limit.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,switching-freq:
+ description:
+ kHz; switching frequency.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
1600, 1920, 2400, 3200, 4800, 9600 ]
+
+ qcom,ovp:
+ description:
+ V; Over-voltage protection limit.
+ This property is supported only for WLED3.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 27, 29, 32, 35 ]
+ - default: 29
+
+ qcom,ovp-millivolt:
+ description:
+ Over-voltage protection limit. This property is for WLED4 only.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 18100, 19600, 29600, 31100 ]
+ - default: 29600
+
+ qcom,num-strings:
+ description:
+ number of led strings attached.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,enabled-strings:
+ description:
+ Array of the WLED strings numbered from 0 to 3. Each
+ string of leds are operated individually. Specify the
+ list of strings used by the device. Any combination of
+ led strings can be used.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+
+ qcom,external-pfet:
+ description:
+ Specify if external PFET control for short circuit
+ protection is used. This property is supported only
+ for WLED4.
+ type: boolean
+
+ qcom,auto-string-detection:
+ description:
+ Enables auto-detection of the WLED string configuration.
+ This feature is not supported for WLED3.
+ type: boolean
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pm8941-wled
+
+ then:
+ properties:
+ qcom,current-boost-limit:
+ enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
+ default: 805
+
+ qcom,switching-freq:
+ default: 1600
+
+ qcom,num-strings:
+ enum: [ 1, 2, 3 ]
+
+ interrupts:
+ items:
+ - description: over voltage protection interrupt.
+
+ interrupt-names:
+ items:
+ - const: ovp
+
+ else:
+ properties:
+ qcom,current-boost-limit:
+ enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
+ default: 970
+
+ qcom,switching-freq:
+ default: 800
+
+ qcom,num-strings:
+ enum: [ 1, 2, 3, 4 ]
+
+ interrupts:
+ items:
+ - description: over voltage protection interrupt.
+ - description: short circuit interrupt.
+
+ interrupt-names:
+ items:
+ - const: ovp
+ - const: short
Move these 2 props to the main section adding a 'minItems: 1'. Then
just
define 'minItems: 2' here and 'maxItems: 1' in the 'then' clause.
+
+required:
+ - compatible
+ - reg
+ - label
Add:
additionalProperties: false
+
+examples:
+ - |
+ backlight@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800 0x100>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ qcom,enabled-strings = <0 1>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
