On Tue, Apr 07, 2020 at 09:17:07PM +0530, Kiran Gunda wrote: > Convert the qcom-wled bindings from .txt to .yaml format. > Also replace PM8941 to WLED3 and PMI8998 to WLED4. > > Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx> > Signed-off-by: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx> > Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx> > --- > .../bindings/leds/backlight/qcom-wled.txt | 154 ---------------- > .../bindings/leds/backlight/qcom-wled.yaml | 201 +++++++++++++++++++++ > 2 files changed, 201 insertions(+), 154 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > create mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > new file mode 100644 > index 0000000..770e780 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > @@ -0,0 +1,201 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Binding for Qualcomm Technologies, Inc. WLED driver > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > + - Kiran Gunda <kgunda@xxxxxxxxxxxxxx> > + > +description: | > + WLED (White Light Emitting Diode) driver is used for controlling display > + backlight that is part of PMIC on Qualcomm Technologies, Inc. reference > + platforms. The PMIC is connected to the host processor via SPMI bus. > + > +properties: > + compatible: > + enum: > + - qcom,pm8941-wled > + - qcom,pmi8998-wled > + - qcom,pm660l-wled > + > + reg: > + maxItems: 1 > + > + default-brightness: > + description: > + brightness value on boot. > + minimum: 0 > + maximum: 4095 > + default: 2048 > + > + label: true > + > + qcom,cs-out: > + description: > + enable current sink output. > + This property is supported only for WLED3. > + type: boolean > + > + qcom,cabc: > + description: > + enable content adaptive backlight control. > + type: boolean > + > + qcom,ext-gen: > + description: > + use externally generated modulator signal to dim. > + This property is supported only for WLED3. > + type: boolean > + > + qcom,current-limit: > + description: > + mA; per-string current limit. > + This property is supported only for WLED3. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + default: 20 > + minimum: 0 > + maximum: 25 > + multipleOf: 1 No point in defining a multiple of 1. > + > + qcom,current-limit-microamp: > + description: > + uA; per-string current limit. > + default: 25 > + minimum: 0 > + maximum: 30000 > + multipleOf: 25 > + > + qcom,current-boost-limit: > + description: > + mA; boost current limit. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > + qcom,switching-freq: > + description: > + kHz; switching frequency. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] > + > + qcom,ovp: > + description: > + V; Over-voltage protection limit. > + This property is supported only for WLED3. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - enum: [ 27, 29, 32, 35 ] > + - default: 29 > + > + qcom,ovp-millivolt: > + description: > + Over-voltage protection limit. This property is for WLED4 only. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - enum: [ 18100, 19600, 29600, 31100 ] > + - default: 29600 > + > + qcom,num-strings: > + description: > + number of led strings attached. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > + qcom,enabled-strings: > + description: > + Array of the WLED strings numbered from 0 to 3. Each > + string of leds are operated individually. Specify the > + list of strings used by the device. Any combination of > + led strings can be used. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 4 > + > + qcom,external-pfet: > + description: > + Specify if external PFET control for short circuit > + protection is used. This property is supported only > + for WLED4. > + type: boolean > + > + qcom,auto-string-detection: > + description: > + Enables auto-detection of the WLED string configuration. > + This feature is not supported for WLED3. > + type: boolean > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: qcom,pm8941-wled > + > + then: > + properties: > + qcom,current-boost-limit: > + enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ] > + default: 805 > + > + qcom,switching-freq: > + default: 1600 > + > + qcom,num-strings: > + enum: [ 1, 2, 3 ] > + > + interrupts: > + items: > + - description: over voltage protection interrupt. > + > + interrupt-names: > + items: > + - const: ovp > + > + else: > + properties: > + qcom,current-boost-limit: > + enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ] > + default: 970 > + > + qcom,switching-freq: > + default: 800 > + > + qcom,num-strings: > + enum: [ 1, 2, 3, 4 ] > + > + interrupts: > + items: > + - description: over voltage protection interrupt. > + - description: short circuit interrupt. > + > + interrupt-names: > + items: > + - const: ovp > + - const: short Move these 2 props to the main section adding a 'minItems: 1'. Then just define 'minItems: 2' here and 'maxItems: 1' in the 'then' clause. > + > +required: > + - compatible > + - reg > + - label Add: additionalProperties: false > + > +examples: > + - | > + backlight@d800 { > + compatible = "qcom,pm8941-wled"; > + reg = <0xd800 0x100>; > + label = "backlight"; > + > + qcom,cs-out; > + qcom,current-limit = <20>; > + qcom,current-boost-limit = <805>; > + qcom,switching-freq = <1600>; > + qcom,ovp = <29>; > + qcom,num-strings = <2>; > + qcom,enabled-strings = <0 1>; > + }; > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
