On Thu, Feb 20, 2020 at 5:53 AM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Vasily, Hi Laurent, > Thank you for the patch. > > On Thu, Feb 20, 2020 at 12:35:04AM -0800, Vasily Khoruzhick wrote: > > devm_regulator_get() returns either a dummy regulator or -EPROBE_DEFER, > > we don't need to print scary message in either case. > > > > Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx> > > --- > > drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 8 ++------ > > 1 file changed, 2 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c > > index 0d8d083b0207..0204bbe4f0a0 100644 > > --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c > > +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c > > @@ -713,17 +713,13 @@ static int anx6345_i2c_probe(struct i2c_client *client, > > > > /* 1.2V digital core power regulator */ > > anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12"); > > - if (IS_ERR(anx6345->dvdd12)) { > > - DRM_ERROR("dvdd12-supply not found\n"); > > + if (IS_ERR(anx6345->dvdd12)) > > return PTR_ERR(anx6345->dvdd12); > > - } > > There could be other errors such as -EBUSY or -EPERM. The following > would ensure a message gets printed in those cases, while avoiding > spamming the kernel log in the EPROBE_DEFER case. > > if (IS_ERR(anx6345->dvdd12)) { > if (PTR_ERR(anx6345->dvdd12) != -EPROBE_DEFER) > DRM_ERROR("Failed to get dvdd12 supply (%d)\n", > PTR_ERR(anx6345->dvdd12)); > return PTR_ERR(anx6345->dvdd12); > } > > But maybe it's overkill ? With or without that change (for the second > regulator below too), Thanks, I'll do as you suggested. > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > /* 2.5V digital core power regulator */ > > anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25"); > > - if (IS_ERR(anx6345->dvdd25)) { > > - DRM_ERROR("dvdd25-supply not found\n"); > > + if (IS_ERR(anx6345->dvdd25)) > > return PTR_ERR(anx6345->dvdd25); > > - } > > > > /* GPIO for chip reset */ > > anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > > -- > Regards, > > Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel