Re: [PATCH 2/6] drm/bridge: anx6345: Clean up error handling in probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vasily,

Thank you for the patch.

On Thu, Feb 20, 2020 at 12:35:04AM -0800, Vasily Khoruzhick wrote:
> devm_regulator_get() returns either a dummy regulator or -EPROBE_DEFER,
> we don't need to print scary message in either case.
> 
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> ---
>  drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> index 0d8d083b0207..0204bbe4f0a0 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> @@ -713,17 +713,13 @@ static int anx6345_i2c_probe(struct i2c_client *client,
>  
>  	/* 1.2V digital core power regulator  */
>  	anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12");
> -	if (IS_ERR(anx6345->dvdd12)) {
> -		DRM_ERROR("dvdd12-supply not found\n");
> +	if (IS_ERR(anx6345->dvdd12))
>  		return PTR_ERR(anx6345->dvdd12);
> -	}

There could be other errors such as -EBUSY or -EPERM. The following
would ensure a message gets printed in those cases, while avoiding
spamming the kernel log in the EPROBE_DEFER case.

	if (IS_ERR(anx6345->dvdd12)) {
		if (PTR_ERR(anx6345->dvdd12) != -EPROBE_DEFER)
			DRM_ERROR("Failed to get dvdd12 supply (%d)\n",
				  PTR_ERR(anx6345->dvdd12));
		return PTR_ERR(anx6345->dvdd12);
	}

But maybe it's overkill ? With or without that change (for the second
regulator below too),

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

>  	/* 2.5V digital core power regulator  */
>  	anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25");
> -	if (IS_ERR(anx6345->dvdd25)) {
> -		DRM_ERROR("dvdd25-supply not found\n");
> +	if (IS_ERR(anx6345->dvdd25))
>  		return PTR_ERR(anx6345->dvdd25);
> -	}
>  
>  	/* GPIO for chip reset */
>  	anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux