Hi
Am 25.01.20 um 20:55 schrieb Rich Felker:
> Signed-off-by: Rich Felker <dalias@xxxxxxxx>
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.
This HW is supported by mgag200, which is maintained. Can't you use that?
Best regards
Thomas
>
> ---
> drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
> .accelID = FB_ACCEL_MATROX_MGAG200,
> .lowlevel = &matrox_G100
> };
> +static struct video_board vbG200eW = {
> + .maxvram = 0x800000,
> + .maxdisplayable = 0x800000,
> + .accelID = FB_ACCEL_MATROX_MGAG200,
> + .lowlevel = &matrox_G100
> +};
> /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
> whole 32MB */
> static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
> MGA_G200,
> &vbG200,
> "MGA-G200 (PCI)"},
> + {PCI_VENDOR_ID_MATROX, 0x0532, 0xFF,
> + 0, 0,
> + DEVF_G200,
> + 250000,
> + MGA_G200,
> + &vbG200eW,
> + "MGA-G200eW (PCI)"},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF,
> PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC,
> DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {PCI_VENDOR_ID_MATROX, 0x0532,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400,
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
