Hi Maxime. Thanks for your comments! > > > + - allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + - minItems: 3 > > + maxItems: 3 > > + items: > > + description: min, typ, max number of pixels > > When minItems and maxitems are equal, you can just set one, the other > one will be filled by the DT schemas tools. I tried to drop minItems: 3 But it just did not work - I could not make it accept <xx> and <xx xx xx>. And the schema should, and does, reject <xx xx> and <xx xx xx xx> I do not know why - I just did a trial-and-error on this. > > + hsync-active: > > + description: | > > + Horizontal sync pulse. > > + If omitted then it is not used by the hardware > > + oneOf: > > + - const: 0 > > + description: active low > > + - const: 1 > > + description: active high > > You probably should use an enum here (and in other similar > places). oneOf / anyOf / allOF errors are pretty cryptic, while it > will it's really better with an enum. Yep - enum: [0, 1] is much nicer. Sam _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
