On Fri, 2020-01-24 at 14:20 -0500, Mikita Lipski wrote: > On 1/24/20 2:10 PM, Lyude Paul wrote: > > Disabling a display on MST can potentially happen after the entire MST > > topology has been removed, which means that we can't communicate with > > the topology at all in this scenario. Likewise, this also means that we > > can't properly update payloads on the topology and as such, it's a good > > idea to ignore payload update failures when disabling displays. > > Currently, amdgpu makes the mistake of halting the payload update > > process when any payload update failures occur, resulting in leaving > > DC's local copies of the payload tables out of date. > > > > This ends up causing problems with hotplugging MST topologies, and > > causes modesets on the second hotplug to fail like so: > > > > [drm] Failed to updateMST allocation table forpipe idx:1 > > ------------[ cut here ]------------ > > WARNING: CPU: 5 PID: 1511 at > > drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677 > > update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] > > Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack > > nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 > > nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc > > vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic > > snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops > > videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul > > snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core > > ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm > > sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd > > wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O) > > rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm > > drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm > > crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core > > rtsx_pci pinctrl_amd > > CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0- > > rc7Lyude-Test+ #4 > > Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) > > 01/31/2019 > > RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] > > Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06 > > 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9 > > 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00 > > RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202 > > RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000 > > RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610 > > RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000 > > R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000 > > R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002 > > FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) > > knlGS:0000000000000000 > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0 > > Call Trace: > > ? mutex_lock+0xe/0x30 > > dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu] > > ? dm_read_reg_func+0x39/0xb0 [amdgpu] > > ? core_link_enable_stream+0x656/0x730 [amdgpu] > > core_link_enable_stream+0x656/0x730 [amdgpu] > > dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu] > > ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu] > > ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu] > > dc_commit_state+0x292/0x770 [amdgpu] > > ? add_timer+0x101/0x1f0 > > ? ttm_bo_put+0x1a1/0x2f0 [ttm] > > amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu] > > ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu] > > ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu] > > ? ttm_bo_handle_move_mem+0x118/0x570 [ttm] > > ? ttm_bo_validate+0x134/0x150 [ttm] > > ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu] > > ? _cond_resched+0x15/0x30 > > ? wait_for_completion_timeout+0x38/0x160 > > ? _cond_resched+0x15/0x30 > > ? wait_for_completion_interruptible+0x33/0x190 > > commit_tail+0x94/0x130 [drm_kms_helper] > > drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper] > > drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper] > > drm_mode_setcrtc+0x194/0x6a0 [drm] > > ? _cond_resched+0x15/0x30 > > ? mutex_lock+0xe/0x30 > > ? drm_mode_getcrtc+0x180/0x180 [drm] > > drm_ioctl_kernel+0xaa/0xf0 [drm] > > drm_ioctl+0x208/0x390 [drm] > > ? drm_mode_getcrtc+0x180/0x180 [drm] > > amdgpu_drm_ioctl+0x49/0x80 [amdgpu] > > do_vfs_ioctl+0x458/0x6d0 > > ksys_ioctl+0x5e/0x90 > > __x64_sys_ioctl+0x16/0x20 > > do_syscall_64+0x55/0x1b0 > > entry_SYSCALL_64_after_hwframe+0x44/0xa9 > > RIP: 0033:0x7fab2121f87b > > Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff > > ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 > > f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 > > RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 > > RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b > > RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b > > RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10 > > R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2 > > R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280 > > ---[ end trace 6ea888c24d2059cd ]--- > > > > Note as well, I have only been able to reproduce this on setups with 2 > > MST displays. > > > > Changes since v1: > > * Don't return false when part 1 or part 2 of updating the payloads > > fails, we don't want to abort at any step of the process even if > > things fail > > > > Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx> > > Acked-by: Harry Wentland <harry.wentland@xxxxxxx> > > Cc: stable@xxxxxxxxxxxxxxx > > --- > > .../drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 13 ++++--------- > > 1 file changed, 4 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > index 069b7a6f5597..318b474ff20e 100644 > > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > @@ -216,7 +216,8 @@ bool dm_helpers_dp_mst_write_payload_allocation_table( > > drm_dp_mst_reset_vcpi_slots(mst_mgr, mst_port); > > } > > > > - ret = drm_dp_update_payload_part1(mst_mgr); > > + /* It's OK for this to fail */ > > + drm_dp_update_payload_part1(mst_mgr); > > > > /* mst_mgr->->payloads are VC payload notify MST branch using DPCD or > > * AUX message. The sequence is slot 1-63 allocated sequence for each > > @@ -225,9 +226,6 @@ bool dm_helpers_dp_mst_write_payload_allocation_table( > > > > get_payload_table(aconnector, proposed_table); > > > > - if (ret) > > - return false; > > - > > Sorry for being picky, but I think this might cause compilation error on > some systems for having unused variable (int ret). Its better just to > strip out both ret integer declarations. No problem! It wouldn't be fair if I was the only one who got to be picky anyway ;) > > Otherwise the patch is good. Thanks again! > > Reviewed-by: Mikita Lipski <Mikita.Lipski@xxxxxxx> > > Mikita > > > return true; > > } > > > > @@ -285,7 +283,6 @@ bool dm_helpers_dp_mst_send_payload_allocation( > > struct amdgpu_dm_connector *aconnector; > > struct drm_dp_mst_topology_mgr *mst_mgr; > > struct drm_dp_mst_port *mst_port; > > - int ret; > > > > aconnector = (struct amdgpu_dm_connector *)stream->dm_stream_context; > > > > @@ -299,10 +296,8 @@ bool dm_helpers_dp_mst_send_payload_allocation( > > if (!mst_mgr->mst_state) > > return false; > > > > - ret = drm_dp_update_payload_part2(mst_mgr); > > - > > - if (ret) > > - return false; > > + /* It's OK for this to fail */ > > + drm_dp_update_payload_part2(mst_mgr); > > > > if (!enable) > > drm_dp_mst_deallocate_vcpi(mst_mgr, mst_port); > > -- Cheers, Lyude Paul _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
