Re: [PATCH v3 5/6] drm: atmel-hlcdc: prefer a lower pixel-clock than requested

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02.01.2020 11:08, Sam Ravnborg wrote:
> On Wed, Dec 18, 2019 at 02:28:28PM +0200, Claudiu Beznea wrote:
>> From: Peter Rosin <peda@xxxxxxxxxx>
>>
>> The intention was to only select a higher pixel-clock rate than the
>> requested, if a slight overclocking would result in a rate significantly
>> closer to the requested rate than if the conservative lower pixel-clock
>> rate is selected. The fixed patch has the logic the other way around and
>> actually prefers the higher frequency. Fix that.
>>
>> Fixes: f6f7ad323461 ("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")
> The id is wrong here - the right one is: 9946a3a9dbedaaacef8b7e94f6ac144f1daaf1de

Right! Sorry for this one! Thank you for fixing it up.

Claudiu Beznea

> The wrong id above was used before - so I think it is a copy'n'paste
> thing.
> 
> Hint: try "dim fixes 9946a3a9dbedaaacef8b7e94f6ac144f1daaf1de"
> 
> If I get a quick response from Lee I can fix it up while applying.
> 
>         Sam
> 
>> Reported-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>> Tested-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
>> ---
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> index 721fa88bf71d..10985134ce0b 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> @@ -121,8 +121,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
>>               int div_low = prate / mode_rate;
>>
>>               if (div_low >= 2 &&
>> -                 ((prate / div_low - mode_rate) <
>> -                  10 * (mode_rate - prate / div)))
>> +                 (10 * (prate / div_low - mode_rate) <
>> +                  (mode_rate - prate / div)))
>>                       /*
>>                        * At least 10 times better when using a higher
>>                        * frequency than requested, instead of a lower.
>> --
>> 2.7.4
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux