On Fri, 13 Dec 2019, Claudiu Beznea wrote:
> For HLCDC timing engine configurations bit ATMEL_HLCDC_SIP of
> ATMEL_HLCDC_SR needs to be polled before applying new config. In case of
> timeout there is no indicator about this, so, return in case of timeout
> and also print a message about this.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
> drivers/mfd/atmel-hlcdc.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
> index 92bfcaa62ace..a1e46c87b956 100644
> --- a/drivers/mfd/atmel-hlcdc.c
> +++ b/drivers/mfd/atmel-hlcdc.c
> @@ -40,10 +40,17 @@ static int regmap_atmel_hlcdc_reg_write(void *context, unsigned int reg,
>
> if (reg <= ATMEL_HLCDC_DIS) {
> u32 status;
> -
> - readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
> - status, !(status & ATMEL_HLCDC_SIP),
> - 1, 100);
> + int ret;
> +
> + ret = readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
> + status,
> + !(status & ATMEL_HLCDC_SIP),
> + 1, 100);
> + if (ret) {
> + dev_err(hregmap->dev,
> + "Timeout waiting for ATMEL_HLCDC_SIP\n");
Nit: Just in case you have to rework this, placing register names in
the kernel log isn't usually helpful. Can you swap it out for a more
user friendly message?
"Timed out waiting for ..."
... X status
... Y to update
... setting Z configuration
Etc.
> + return ret;
> + }
> }
>
> writel(val, hregmap->regs + reg);
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
