For HLCDC timing engine configurations bit ATMEL_HLCDC_SIP of
ATMEL_HLCDC_SR needs to be polled before applying new config. In case of
timeout there is no indicator about this, so, return in case of timeout
and also print a message about this.
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
drivers/mfd/atmel-hlcdc.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
index 92bfcaa62ace..a1e46c87b956 100644
--- a/drivers/mfd/atmel-hlcdc.c
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -40,10 +40,17 @@ static int regmap_atmel_hlcdc_reg_write(void *context, unsigned int reg,
if (reg <= ATMEL_HLCDC_DIS) {
u32 status;
-
- readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
- status, !(status & ATMEL_HLCDC_SIP),
- 1, 100);
+ int ret;
+
+ ret = readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
+ status,
+ !(status & ATMEL_HLCDC_SIP),
+ 1, 100);
+ if (ret) {
+ dev_err(hregmap->dev,
+ "Timeout waiting for ATMEL_HLCDC_SIP\n");
+ return ret;
+ }
}
writel(val, hregmap->regs + reg);
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
