Re: [PATCH 1/1] drm/radeon drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 14, 2019 at 9:05 PM Sam Bobroff <sbobroff@xxxxxxxxxxxxx> wrote:
>
> The INTERRUPT_CNTL2 register expects a valid DMA address, but is
> currently set with a GPU MC address.  This can cause problems on
> systems that detect the resulting DMA read from an invalid address
> (found on a Power8 guest).
>
> Instead, use the DMA address of the dummy page because it will always
> be safe.
>
> Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
> Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
> Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
> Fixes: 27ae10641e9c ("drm/amdgpu: add interupt handler implementation for si v3")
> Signed-off-by: Sam Bobroff <sbobroff@xxxxxxxxxxxxx>

Can you split this into two patches, one for radeon and one for
amdgpu?  I'll apply them.

Thanks!

Alex

> ---
> A couple of notes:
> - Initial discussion:
>   https://lists.freedesktop.org/archives/dri-devel/2019-November/244090.html
> - I have only tested the case that uses r600_irq_init(), but they are all very
>   similar.
> - I've included a fixes tag for each change, but I don't know if that's the
>   right thing to do in this case (please feel free to fix them on commit or
>   whatever).
>
> Cheers,
> Sam.
>
>  drivers/gpu/drm/amd/amdgpu/si_ih.c | 3 ++-
>  drivers/gpu/drm/radeon/cik.c       | 4 ++--
>  drivers/gpu/drm/radeon/r600.c      | 4 ++--
>  drivers/gpu/drm/radeon/si.c        | 4 ++--
>  4 files changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/si_ih.c b/drivers/gpu/drm/amd/amdgpu/si_ih.c
> index 57bb5f9e08b2..88ae27a5a03d 100644
> --- a/drivers/gpu/drm/amd/amdgpu/si_ih.c
> +++ b/drivers/gpu/drm/amd/amdgpu/si_ih.c
> @@ -64,7 +64,8 @@ static int si_ih_irq_init(struct amdgpu_device *adev)
>         u32 interrupt_cntl, ih_cntl, ih_rb_cntl;
>
>         si_ih_disable_interrupts(adev);
> -       WREG32(INTERRUPT_CNTL2, adev->irq.ih.gpu_addr >> 8);
> +       /* set dummy read address to dummy page address */
> +       WREG32(INTERRUPT_CNTL2, adev->dummy_page_addr >> 8);
>         interrupt_cntl = RREG32(INTERRUPT_CNTL);
>         interrupt_cntl &= ~IH_DUMMY_RD_OVERRIDE;
>         interrupt_cntl &= ~IH_REQ_NONSNOOP_EN;
> diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
> index 62eab82a64f9..897442754fd0 100644
> --- a/drivers/gpu/drm/radeon/cik.c
> +++ b/drivers/gpu/drm/radeon/cik.c
> @@ -6969,8 +6969,8 @@ static int cik_irq_init(struct radeon_device *rdev)
>         }
>
>         /* setup interrupt control */
> -       /* XXX this should actually be a bus address, not an MC address. same on older asics */
> -       WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
> +       /* set dummy read address to dummy page address */
> +       WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
>         interrupt_cntl = RREG32(INTERRUPT_CNTL);
>         /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
>          * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
> diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
> index e937cc01910d..033bc466a862 100644
> --- a/drivers/gpu/drm/radeon/r600.c
> +++ b/drivers/gpu/drm/radeon/r600.c
> @@ -3696,8 +3696,8 @@ int r600_irq_init(struct radeon_device *rdev)
>         }
>
>         /* setup interrupt control */
> -       /* set dummy read address to ring address */
> -       WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
> +       /* set dummy read address to dummy page address */
> +       WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
>         interrupt_cntl = RREG32(INTERRUPT_CNTL);
>         /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
>          * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
> diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
> index 05894d198a79..1d8efb0eefdb 100644
> --- a/drivers/gpu/drm/radeon/si.c
> +++ b/drivers/gpu/drm/radeon/si.c
> @@ -5997,8 +5997,8 @@ static int si_irq_init(struct radeon_device *rdev)
>         }
>
>         /* setup interrupt control */
> -       /* set dummy read address to ring address */
> -       WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
> +       /* set dummy read address to dummy page address */
> +       WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
>         interrupt_cntl = RREG32(INTERRUPT_CNTL);
>         /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
>          * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
> --
> 2.22.0.216.g00a2a96fc9
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux