>-----Original Message-----
>From: Intel-gfx <intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Ville Syrjala
>Sent: Friday, October 4, 2019 7:49 PM
>To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
>Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Wayne Lin <waynelin@xxxxxxx>
>Subject: [Intel-gfx] [PATCH 2/4] drm/edid: Extract drm_mode_cea_vic()
>
>From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
>Extract the logic to compute the final CEA VIC to a small helper.
>We'll reorder it a bit to make future modifications more straightforward. No function
>changes.
Changes look good to me.
Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
>Cc: Wayne Lin <waynelin@xxxxxxx>
>Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>---
> drivers/gpu/drm/drm_edid.c | 53 +++++++++++++++++++++-----------------
> 1 file changed, 30 insertions(+), 23 deletions(-)
>
>diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index
>3df8267adab9..495b7fb4d9ef 100644
>--- a/drivers/gpu/drm/drm_edid.c
>+++ b/drivers/gpu/drm/drm_edid.c
>@@ -5160,6 +5160,35 @@ drm_hdmi_infoframe_set_hdr_metadata(struct
>hdmi_drm_infoframe *frame, }
>EXPORT_SYMBOL(drm_hdmi_infoframe_set_hdr_metadata);
>
>+static u8 drm_mode_cea_vic(struct drm_connector *connector,
>+ const struct drm_display_mode *mode) {
>+ u8 vendor_if_vic = drm_match_hdmi_mode(mode);
>+ bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
>+ u8 vic;
>+
>+ /*
>+ * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
>+ * we should send its VIC in vendor infoframes, else send the
>+ * VIC in AVI infoframes. Lets check if this mode is present in
>+ * HDMI 1.4b 4K modes
>+ */
>+ if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
>+ return 0;
>+
>+ vic = drm_match_cea_mode(mode);
>+
>+ /*
>+ * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
>+ * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
>+ * have to make sure we dont break HDMI 1.4 sinks.
>+ */
>+ if (!is_hdmi2_sink(connector) && vic > 64)
>+ return 0;
>+
>+ return vic;
>+}
>+
> /**
> * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
> * data from a DRM display mode
>@@ -5187,29 +5216,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct
>hdmi_avi_infoframe *frame,
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> frame->pixel_repeat = 1;
>
>- frame->video_code = drm_match_cea_mode(mode);
>-
>- /*
>- * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
>- * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
>- * have to make sure we dont break HDMI 1.4 sinks.
>- */
>- if (!is_hdmi2_sink(connector) && frame->video_code > 64)
>- frame->video_code = 0;
>-
>- /*
>- * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
>- * we should send its VIC in vendor infoframes, else send the
>- * VIC in AVI infoframes. Lets check if this mode is present in
>- * HDMI 1.4b 4K modes
>- */
>- if (frame->video_code) {
>- u8 vendor_if_vic = drm_match_hdmi_mode(mode);
>- bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
>-
>- if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
>- frame->video_code = 0;
>- }
>+ frame->video_code = drm_mode_cea_vic(connector, mode);
>
> frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
>
>--
>2.21.0
>
>_______________________________________________
>Intel-gfx mailing list
>Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
>https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
