Hi Adam, Thank you for the patch. On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote: > This patch adds documentation of device tree bindings for the WVGA panel > Logic PD Type 28 display. > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > --- > V5: Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k > V4: Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1 > V3: Correct build errors from 'make dt_binding_check' > V2: Use YAML instead of TXT for binding > > diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml > new file mode 100644 > index 000000000000..2834287b8d88 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml > @@ -0,0 +1,42 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel > + > +maintainers: > + - Adam Ford <aford173@xxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: logicpd,type28 > + > + power-supply: true > + enable-gpios: true > + backlight: true > + port: true > + > +required: > + - compatible Should the port be required too ? Apart from that, Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > + > +additionalProperties: false > + > +examples: > + - | > + lcd0: display { > + compatible = "logicpd,type28"; > + enable-gpios = <&gpio5 27 0>; > + backlight = <&backlight>; > + port { > + lcd_in: endpoint { > + remote-endpoint = <&dpi_out>; > + }; > + }; > + }; > + > +... -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
