Hi, On Tue, Sep 24, 2019 at 02:40:54PM +0200, megous hlavni wrote: > > > On first run of the X server, only the black screen and the layer > > > containing the cursor is visible. Switching to console and back > > > corrects the situation. > > > > > > I have dumped registers, and found out this: > > > > > > (In both cases there are two enabled planes, plane 1 with zpos 0 and > > > plane 3 with zpos 1). > > > > > > 1) First Xorg run: > > > > > > 0x01101000 : 00000201 > > > 0x01101080 : 00000030 > > > > > > BLD_FILL_COLOR_CTL: (aka SUN8I_MIXER_BLEND_PIPE_CTL) > > > P1_EN > > > > > > BLD_CH_RTCTL: (aka SUN8I_MIXER_BLEND_ROUTE) > > > P0_RTCTL channel0 > > > P1_RTCTL channel3 > > > > > > 2) After switch to console and back to Xorg: > > > > > > 0x01101000 : 00000301 > > > 0x01101080 : 00000031 > > > > > > BLD_FILL_COLOR_CTL: > > > P1_EN and P0_EN > > > > > > BLD_CH_RTCTL: > > > P0_RTCTL channel1 > > > P1_RTCTL channel3 > > > > > > What happens is that sun8i_ui_layer_enable() function may disable > > > blending pipes even if it is no longer assigned to its layer, because > > > of incorrect state/zpos tracking in the driver. > > > > > > In particular, layer 1 is configured to zpos 0 and thus uses pipe 0. > > > When layer 3 is enabled by X server, sun8i_ui_layer_enable() will get > > > called with old_zpos=0 zpos=1, which will lead to disabling of pipe 0. > > > > > > In general this issue can happen to any layer during enable or zpos > > > changes on multiple layers at once. > > > > > > To correct this we now pass previous enabled/disabled state of the > > > layer, and pass real previous zpos of the layer to > > > sun8i_ui_layer_enable() and rework the sun8i_ui_layer_enable() function > > > to react to the state changes correctly. In order to not complicate > > > the atomic_disable callback with all of the above changes, we simply > > > remove it and implement all the chanes as part of atomic_update, which > > > also reduces the code duplication. > > > > I'm not even sure why we need that old state. Can't we just reset > > completely the whole thing and do the configuration all over again? > > That would be nice from a dev standpoint if we can get a complete state for all > planes at once from DRM core, but how? DRM helper gives callbacks > for updating individual planes with prev and new state. These individual layer > change notifications don't map nicely to how pipes are represented in the mixer > registers. If anyone wants to pursue this further, feel free to. I'm not planning to pursue this fix further, at the moment. regards, o. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
