From: Ondrej Jirman <megous@xxxxxxxxxx>
There are various issues that this re-work of sun8i_[uv]i_layer_enable
function fixes:
- Make sure that we re-initialize zpos on reset
- Minimize register updates by doing them only when state changes
- Fix issue where DE pipe might get disabled even if it is no longer
used by the layer that's currently calling sun8i_ui_layer_enable
- .atomic_disable callback is not really needed because .atomic_update
can do the disable too, so drop the duplicate code
Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 112 ++++++++++++++++---------
drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 112 ++++++++++++++++---------
2 files changed, 142 insertions(+), 82 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
index dd2a1c851939..b88e8ac5ad1c 100644
--- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
@@ -24,10 +24,11 @@
#include "sun8i_ui_scaler.h"
static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int channel,
- int overlay, bool enable, unsigned int zpos,
- unsigned int old_zpos)
+ int overlay, bool was_enabled, bool enable,
+ unsigned int zpos, unsigned int old_zpos)
{
u32 val, bld_base, ch_base;
+ unsigned int old_pipe_ch;
bld_base = sun8i_blender_base(mixer);
ch_base = sun8i_channel_base(mixer, channel);
@@ -35,28 +36,57 @@ static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int channel,
DRM_DEBUG_DRIVER("%sabling channel %d overlay %d\n",
enable ? "En" : "Dis", channel, overlay);
- if (enable)
- val = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN;
- else
- val = 0;
+ if (!was_enabled != !enable) {
+ val = enable ? SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN : 0;
- regmap_update_bits(mixer->engine.regs,
- SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base, overlay),
- SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
-
- if (!enable || zpos != old_zpos) {
regmap_update_bits(mixer->engine.regs,
- SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
- SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
- 0);
+ SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base, overlay),
+ SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
+ }
- regmap_update_bits(mixer->engine.regs,
+ /*
+ * If this layer was enabled and is being disabled or if it is
+ * enabled and just changing zpos, clear the old route, if it is
+ * still configured to this layer in HW.
+ */
+ if ((was_enabled && !enable) || (enable && zpos != old_zpos)) {
+ /* get channel the pipe for old_zpos is routed to from the HW */
+ regmap_read(mixer->engine.regs,
SUN8I_MIXER_BLEND_ROUTE(bld_base),
- SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
- 0);
+ &old_pipe_ch);
+ old_pipe_ch &= SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos);
+ old_pipe_ch >>= SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(old_zpos);
+
+ /*
+ * Check that pipe for old_zpos is still routed to our layer,
+ * and clear/disable it if it is.
+ */
+
+ if (old_pipe_ch == channel) {
+ DRM_DEBUG_DRIVER("chan=%d en=%d->%d zpos=%d->%d\n",
+ channel, was_enabled, enable, old_zpos, zpos);
+
+ DRM_DEBUG_DRIVER(" disable pipe %d\n", old_zpos);
+
+ regmap_update_bits(mixer->engine.regs,
+ SUN8I_MIXER_BLEND_ROUTE(bld_base),
+ SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
+ 0);
+
+ regmap_update_bits(mixer->engine.regs,
+ SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
+ SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
+ 0);
+ }
}
- if (enable) {
+ /*
+ * If enabling this layer or changin zpos, set route to this layer.
+ */
+ if ((enable && !was_enabled) || (enable && zpos != old_zpos)) {
+ DRM_DEBUG_DRIVER("chan=%d en=%d->%d zpos=%d->%d\n",
+ channel, was_enabled, enable, old_zpos, zpos);
+
val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
regmap_update_bits(mixer->engine.regs,
@@ -69,6 +99,8 @@ static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int channel,
SUN8I_MIXER_BLEND_ROUTE(bld_base),
SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos),
val);
+
+ DRM_DEBUG_DRIVER(" enable pipe %d <- ch %d\n", zpos, channel);
}
}
@@ -261,45 +293,43 @@ static int sun8i_ui_layer_atomic_check(struct drm_plane *plane,
true, true);
}
-static void sun8i_ui_layer_atomic_disable(struct drm_plane *plane,
- struct drm_plane_state *old_state)
+static void sun8i_ui_layer_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
{
struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
+ unsigned int zpos = plane->state->normalized_zpos;
unsigned int old_zpos = old_state->normalized_zpos;
struct sun8i_mixer *mixer = layer->mixer;
+ bool was_enabled = old_state->crtc && old_state->visible;
+ bool enable = plane->state->crtc && plane->state->visible;
- sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay, false, 0,
- old_zpos);
+ if (enable) {
+ sun8i_ui_layer_update_coord(mixer, layer->channel,
+ layer->overlay, plane, zpos);
+ sun8i_ui_layer_update_formats(mixer, layer->channel,
+ layer->overlay, plane);
+ sun8i_ui_layer_update_buffer(mixer, layer->channel,
+ layer->overlay, plane);
+ }
+
+ sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
+ was_enabled, enable, zpos, old_zpos);
}
-static void sun8i_ui_layer_atomic_update(struct drm_plane *plane,
- struct drm_plane_state *old_state)
+void sun8i_ui_layer_plane_reset(struct drm_plane *plane)
{
struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
- unsigned int zpos = plane->state->normalized_zpos;
- unsigned int old_zpos = old_state->normalized_zpos;
- struct sun8i_mixer *mixer = layer->mixer;
- if (!plane->state->visible) {
- sun8i_ui_layer_enable(mixer, layer->channel,
- layer->overlay, false, 0, old_zpos);
+ drm_atomic_helper_plane_reset(plane);
+ if (!plane->state)
return;
- }
- sun8i_ui_layer_update_coord(mixer, layer->channel,
- layer->overlay, plane, zpos);
- sun8i_ui_layer_update_formats(mixer, layer->channel,
- layer->overlay, plane);
- sun8i_ui_layer_update_buffer(mixer, layer->channel,
- layer->overlay, plane);
- sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
- true, zpos, old_zpos);
+ plane->state->zpos = layer->channel;
}
static struct drm_plane_helper_funcs sun8i_ui_layer_helper_funcs = {
.prepare_fb = drm_gem_fb_prepare_fb,
.atomic_check = sun8i_ui_layer_atomic_check,
- .atomic_disable = sun8i_ui_layer_atomic_disable,
.atomic_update = sun8i_ui_layer_atomic_update,
};
@@ -308,7 +338,7 @@ static const struct drm_plane_funcs sun8i_ui_layer_funcs = {
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.destroy = drm_plane_cleanup,
.disable_plane = drm_atomic_helper_disable_plane,
- .reset = drm_atomic_helper_plane_reset,
+ .reset = sun8i_ui_layer_plane_reset,
.update_plane = drm_atomic_helper_update_plane,
};
diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
index bd0e6a52d1d8..675ebcdac00b 100644
--- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
@@ -18,10 +18,11 @@
#include "sun8i_vi_scaler.h"
static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
- int overlay, bool enable, unsigned int zpos,
- unsigned int old_zpos)
+ int overlay, bool was_enabled, bool enable,
+ unsigned int zpos, unsigned int old_zpos)
{
u32 val, bld_base, ch_base;
+ unsigned int old_pipe_ch;
bld_base = sun8i_blender_base(mixer);
ch_base = sun8i_channel_base(mixer, channel);
@@ -29,28 +30,57 @@ static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
DRM_DEBUG_DRIVER("%sabling VI channel %d overlay %d\n",
enable ? "En" : "Dis", channel, overlay);
- if (enable)
- val = SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN;
- else
- val = 0;
-
- regmap_update_bits(mixer->engine.regs,
- SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay),
- SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val);
+ if (!was_enabled != !enable) {
+ val = enable ? SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN : 0;
- if (!enable || zpos != old_zpos) {
regmap_update_bits(mixer->engine.regs,
- SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
- SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
- 0);
+ SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay),
+ SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val);
+ }
- regmap_update_bits(mixer->engine.regs,
+ /*
+ * If this layer was enabled and is being disabled or if it is
+ * enabled and just changing zpos, clear the old route, if it is
+ * still configured to this layer in HW.
+ */
+ if ((was_enabled && !enable) || (enable && zpos != old_zpos)) {
+ /* get channel the pipe for old_zpos is routed to from the HW */
+ regmap_read(mixer->engine.regs,
SUN8I_MIXER_BLEND_ROUTE(bld_base),
- SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
- 0);
+ &old_pipe_ch);
+ old_pipe_ch &= SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos);
+ old_pipe_ch >>= SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(old_zpos);
+
+ /*
+ * Check that pipe for old_zpos is still routed to our layer,
+ * and clear/disable it if it is.
+ */
+
+ if (old_pipe_ch == channel) {
+ DRM_DEBUG_DRIVER("chan=%d en=%d->%d zpos=%d->%d\n",
+ channel, was_enabled, enable, old_zpos, zpos);
+
+ DRM_DEBUG_DRIVER(" disable pipe %d\n", old_zpos);
+
+ regmap_update_bits(mixer->engine.regs,
+ SUN8I_MIXER_BLEND_ROUTE(bld_base),
+ SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
+ 0);
+
+ regmap_update_bits(mixer->engine.regs,
+ SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
+ SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
+ 0);
+ }
}
- if (enable) {
+ /*
+ * If enabling this layer or changin zpos, set route to this layer.
+ */
+ if ((enable && !was_enabled) || (enable && zpos != old_zpos)) {
+ DRM_DEBUG_DRIVER("chan=%d en=%d->%d zpos=%d->%d\n",
+ channel, was_enabled, enable, old_zpos, zpos);
+
val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
regmap_update_bits(mixer->engine.regs,
@@ -63,6 +93,8 @@ static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
SUN8I_MIXER_BLEND_ROUTE(bld_base),
SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos),
val);
+
+ DRM_DEBUG_DRIVER(" enable pipe %d <- ch %d\n", zpos, channel);
}
}
@@ -345,45 +377,43 @@ static int sun8i_vi_layer_atomic_check(struct drm_plane *plane,
true, true);
}
-static void sun8i_vi_layer_atomic_disable(struct drm_plane *plane,
- struct drm_plane_state *old_state)
+static void sun8i_vi_layer_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
{
struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
+ unsigned int zpos = plane->state->normalized_zpos;
unsigned int old_zpos = old_state->normalized_zpos;
struct sun8i_mixer *mixer = layer->mixer;
+ bool was_enabled = old_state->crtc && old_state->visible;
+ bool enable = plane->state->crtc && plane->state->visible;
- sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay, false, 0,
- old_zpos);
+ if (enable) {
+ sun8i_vi_layer_update_coord(mixer, layer->channel,
+ layer->overlay, plane, zpos);
+ sun8i_vi_layer_update_formats(mixer, layer->channel,
+ layer->overlay, plane);
+ sun8i_vi_layer_update_buffer(mixer, layer->channel,
+ layer->overlay, plane);
+ }
+
+ sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
+ was_enabled, enable, zpos, old_zpos);
}
-static void sun8i_vi_layer_atomic_update(struct drm_plane *plane,
- struct drm_plane_state *old_state)
+void sun8i_vi_layer_plane_reset(struct drm_plane *plane)
{
struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
- unsigned int zpos = plane->state->normalized_zpos;
- unsigned int old_zpos = old_state->normalized_zpos;
- struct sun8i_mixer *mixer = layer->mixer;
- if (!plane->state->visible) {
- sun8i_vi_layer_enable(mixer, layer->channel,
- layer->overlay, false, 0, old_zpos);
+ drm_atomic_helper_plane_reset(plane);
+ if (!plane->state)
return;
- }
- sun8i_vi_layer_update_coord(mixer, layer->channel,
- layer->overlay, plane, zpos);
- sun8i_vi_layer_update_formats(mixer, layer->channel,
- layer->overlay, plane);
- sun8i_vi_layer_update_buffer(mixer, layer->channel,
- layer->overlay, plane);
- sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
- true, zpos, old_zpos);
+ plane->state->zpos = layer->channel;
}
static struct drm_plane_helper_funcs sun8i_vi_layer_helper_funcs = {
.prepare_fb = drm_gem_fb_prepare_fb,
.atomic_check = sun8i_vi_layer_atomic_check,
- .atomic_disable = sun8i_vi_layer_atomic_disable,
.atomic_update = sun8i_vi_layer_atomic_update,
};
@@ -392,7 +422,7 @@ static const struct drm_plane_funcs sun8i_vi_layer_funcs = {
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.destroy = drm_plane_cleanup,
.disable_plane = drm_atomic_helper_disable_plane,
- .reset = drm_atomic_helper_plane_reset,
+ .reset = sun8i_vi_layer_plane_reset,
.update_plane = drm_atomic_helper_update_plane,
};
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
