On 15.08.2019 02:48, Brian Masney wrote: > When attempting to configure this driver on a Nexus 5 phone (msm8974), > setting up the dummy i2c bus for TX_P0 would fail due to an -EBUSY > error. The downstream MSM kernel sources [1] shows that the proper value > for TX_P0 is 0x78, not 0x70, so correct the value to allow device > probing to succeed. > > [1] https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/drivers/video/slimport/slimport_tx_reg.h > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > --- > drivers/gpu/drm/bridge/analogix-anx78xx.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h > index 25e063bcecbc..bc511fc605c9 100644 > --- a/drivers/gpu/drm/bridge/analogix-anx78xx.h > +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.h > @@ -6,7 +6,7 @@ > #ifndef __ANX78xx_H > #define __ANX78xx_H > > -#define TX_P0 0x70 > +#define TX_P0 0x78 This bothers me little. There are no upstream users, grepping android sources suggests that both values can be used [1][2] (grep for "#define TX_P0"), moreover there is code suggesting both values can be valid [3]. Could you verify datasheet which i2c slave addresses are valid for this chip, if both I guess this patch should be reworked. [1]: https://android.googlesource.com/kernel/msm/+/android-msm-flo-3.4-jb-mr2/drivers/misc/slimport_anx7808/slimport_tx_reg.h [2]: https://github.com/AndroidGX/SimpleGX-MM-6.0_H815_20d/blob/master/drivers/video/slimport/anx7812/slimport7812_tx_reg.h [3]: https://github.com/commaai/android_kernel_leeco_msm8996/blob/master/drivers/video/msm/mdss/dp/slimport_custom_declare.h#L73 Regards Andrzej > #define TX_P1 0x7a > #define TX_P2 0x72 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
