On Thu, Aug 15, 2019 at 2:49 AM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote: > When attempting to configure this driver on a Nexus 5 phone (msm8974), > setting up the dummy i2c bus for TX_P0 would fail due to an -EBUSY > error. The downstream MSM kernel sources [1] shows that the proper value > for TX_P0 is 0x78, not 0x70, so correct the value to allow device > probing to succeed. > > [1] https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/drivers/video/slimport/slimport_tx_reg.h > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Yours, Linus Walleij _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
