Hi Thomas,
On 8/26/2019 6:50 PM, Thomas Zimmermann wrote:
Hi Feng
Am 24.08.19 um 07:16 schrieb Feng Tang:
Hi Thomas,
On Thu, Aug 22, 2019 at 07:25:11PM +0200, Thomas Zimmermann wrote:
Hi
I was traveling and could reply earlier. Sorry for taking so long.
No problem! I guessed so :)
Am 13.08.19 um 11:36 schrieb Feng Tang:
Hi Thomas,
On Mon, Aug 12, 2019 at 03:25:45PM +0800, Feng Tang wrote:
Hi Thomas,
On Fri, Aug 09, 2019 at 04:12:29PM +0800, Rong Chen wrote:
Hi,
Actually we run the benchmark as a background process, do
we need to disable the cursor and test again?
There's a worker thread that updates the display from the
shadow buffer. The blinking cursor periodically triggers
the worker thread, but the actual update is just the size
of one character.
The point of the test without output is to see if the
regression comes from the buffer update (i.e., the memcpy
from shadow buffer to VRAM), or from the worker thread. If
the regression goes away after disabling the blinking
cursor, then the worker thread is the problem. If it
already goes away if there's simply no output from the
test, the screen update is the problem. On my machine I
have to disable the blinking cursor, so I think the worker
causes the performance drop.
We disabled redirecting stdout/stderr to /dev/kmsg, and the
regression is gone.
commit: f1f8555dfb9 drm/bochs: Use shadow buffer for bochs
framebuffer console 90f479ae51a drm/mgag200: Replace struct
mga_fbdev with generic framebuffer emulation
f1f8555dfb9a70a2 90f479ae51afa45efab97afdde
testcase/testparams/testbox ----------------
-------------------------- ---------------------------
%stddev change %stddev \ | \ 43785
44481 vm-scalability/300s-8T-anon-cow-seq-hugetlb/lkp-knm01
43785 44481 GEO-MEAN vm-scalability.median
Till now, from Rong's tests: 1. Disabling cursor blinking
doesn't cure the regression. 2. Disabling printint test results
to console can workaround the regression.
Also if we set the perfer_shadown to 0, the regression is also
gone.
We also did some further break down for the time consumed by the
new code.
The drm_fb_helper_dirty_work() calls sequentially 1.
drm_client_buffer_vmap (290 us) 2.
drm_fb_helper_dirty_blit_real (19240 us) 3.
helper->fb->funcs->dirty() ---> NULL for mgag200 driver 4.
drm_client_buffer_vunmap (215 us)
It's somewhat different to what I observed, but maybe I just
couldn't reproduce the problem correctly.
The average run time is listed after the function names.
From it, we can see drm_fb_helper_dirty_blit_real() takes too
long time (about 20ms for each run). I guess this is the root
cause of this regression, as the original code doesn't use this
dirty worker.
True, the original code uses a temporary buffer, but updates the
display immediately.
My guess is that this could be a caching problem. The worker runs
on a different CPU, which doesn't have the shadow buffer in cache.
Yes, that's my thought too. I profiled the working set size, for most
of the drm_fb_helper_dirty_blit_real(), it will update a buffer
4096x768(3 MB), and as it is called 30~40 times per second, it surely
will affect the cache.
As said in last email, setting the prefer_shadow to 0 can avoid
the regrssion. Could it be an option?
Unfortunately not. Without the shadow buffer, the console's
display buffer permanently resides in video memory. It consumes
significant amount of that memory (say 8 MiB out of 16 MiB). That
doesn't leave enough room for anything else.
The best option is to not print to the console.
Do we have other options here?
I attached two patches. Both show an improvement in my setup at least.
Could you please test them independently from each other and report back?
prefetch.patch prefetches the shadow buffer two scanlines ahead during
the blit function. The idea is to have the scanlines in cache when they
are supposed to go to hardware.
schedule.patch schedules the dirty worker on the current CPU core (i.e.,
the one that did the drawing to the shadow buffer). Hopefully the shadow
buffer remains in cache meanwhile.
Best regards
Thomas
Both patches have little impact on the performance from our side.
prefetch.patch:
commit:
f1f8555dfb9 drm/bochs: Use shadow buffer for bochs framebuffer console
90f479ae51a drm/mgag200: Replace struct mga_fbdev with generic
framebuffer emulation
77459f56994 prefetch shadow buffer two lines ahead of blit offset
f1f8555dfb9a70a2 90f479ae51afa45efab97afdde 77459f56994ab87ee5459920b3
testcase/testparams/testbox
---------------- -------------------------- --------------------------
---------------------------
%stddev change %stddev change %stddev
\ | \ | \
42912 -15% 36517 -17% 35515
vm-scalability/performance-300s-8T-anon-cow-seq-hugetlb/lkp-knm01
42912 -15% 36517 -17% 35515
GEO-MEAN vm-scalability.median
schedule.patch:
commit:
f1f8555dfb9 drm/bochs: Use shadow buffer for bochs framebuffer console
90f479ae51a drm/mgag200: Replace struct mga_fbdev with generic
framebuffer emulation
ccc5f095c61 schedule dirty worker on local core
f1f8555dfb9a70a2 90f479ae51afa45efab97afdde ccc5f095c61ff6eded0f0ab1b7
testcase/testparams/testbox
---------------- -------------------------- --------------------------
---------------------------
%stddev change %stddev change %stddev
\ | \ | \
42912 -15% 36517 -15% 36556 ±
4% vm-scalability/performance-300s-8T-anon-cow-seq-hugetlb/lkp-knm01
42912 -15% 36517 -15% 36556
GEO-MEAN vm-scalability.median
Best Regards,
Rong Chen
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
