Hi Harry, Thanks for your feedback, I'll prepare a V2. On 08/23, Wentland, Harry wrote: > On 2019-08-22 6:46 p.m., Siqueira, Rodrigo wrote: > > DP 1.4 specification defines Link Training Tunable PHY Repeater (LTTPR) > > which is required to add support for systems with Thunderbolt or other > > repeater devices. > > > > Cc: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > > Cc: Harry Wentland <harry.wentland@xxxxxxx> > > Cc: Leo Li <sunpeng.li@xxxxxxx> > > Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > > Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > > --- > > include/drm/drm_dp_helper.h | 26 ++++++++++++++++++++++++++ > > 1 file changed, 26 insertions(+) > > > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h > > index 8364502f92cf..8336d960da7f 100644 > > --- a/include/drm/drm_dp_helper.h > > +++ b/include/drm/drm_dp_helper.h > > @@ -134,6 +134,32 @@ > > #define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ > > # define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ > > > > +/** Link Training (LT)-tunable Physical Repeaters - DP 1.4 **/ > > +#define DP_LTTPR_REV 0xf0000 > > +#define DP_LTTPR_MAX_LINK_RATE 0xf0001 > > +#define DP_LTTPR_REPEATER_CNT 0xf0002 > > +#define DP_LTTPR_REPEATER_MODE 0xf0003 > > +#define DP_LTTPR_MAX_LANE_CNT 0xf0004 > > +#define DP_LTTPR_EXTENDED_WAIT_TIMEOUT 0xf0005 > > +#define DP_LTTPR_TRAINING_PATTERN_SET_REPEATER1 0xf0010 > > +#define DP_LTTPR_TRAINING_LANE0_SET_REPEATER1 0xf0011 > > +#define DP_LTTPR_TRAINING_LANE1_SET_REPEATER1 0xf0012 > > +#define DP_LTTPR_TRAINING_LANE2_SET_REPEATER1 0xf0013 > > +#define DP_LTTPR_TRAINING_LANE3_SET_REPEATER1 0xf0014 > > Can we align the register naming with the spec and to align with the > rest of this file? > > The seem to take the form of DP_<name-from-spec> > > E.g. call this one DP_TRAINING_LANE3_SET_PHY_REPEATER1 > > Same for all other registers. > > Keeping the naming consistent makes it easier to search. > > > +#define DP_LTTPR_TRAINING_AUX_RD_INTERVAL_REPEATER1 0xf0020 > > +#define DP_LTTPR_TRANSMITTER_CAPABILITY_REPEATER1 0xf0021 > > +#define DP_LTTPR_LANE0_1_STATUS_REPEATER1 0xf0030 > > +#define DP_LTTPR_LANE2_3_STATUS_REPEATER1 0xf0031 > > +#define DP_LTTPR_LANE_ALIGN_STATUS_UPDATED_REPEATER1 0xf0032 > > +#define DP_LTTPR_ADJUST_REQUEST_LANE0_1_REPEATER1 0xf0033 > > +#define DP_LTTPR_ADJUST_REQUEST_LANE2_3_REPEATER1 0xf0034 > > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE0_REPEATER1 0xf0035 > > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE1_REPEATER1 0xf0037 > > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE2_REPEATER1 0xf0039 > > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE3_REPEATER1 0xf003b > > +#define DP_REPEATER_CONFIGURATION_AND_STATUS_OFFSET 0x50 > > With a cursory search I can't seem to find this in the spec. Where is > this coming from? > > Harry > > > +#define DP_LTTPR_FEC_STATUS_REPEATER1 0xf0290> + > > /* Multiple stream transport */ > > #define DP_FAUX_CAP 0x020 /* 1.2 */ > > # define DP_FAUX_CAP_1 (1 << 0) > > > -- Rodrigo Siqueira https://siqueira.tech
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
