On 2019-08-22 6:46 p.m., Siqueira, Rodrigo wrote: > DP 1.4 specification defines Link Training Tunable PHY Repeater (LTTPR) > which is required to add support for systems with Thunderbolt or other > repeater devices. > > Cc: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > Cc: Harry Wentland <harry.wentland@xxxxxxx> > Cc: Leo Li <sunpeng.li@xxxxxxx> > Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > --- > include/drm/drm_dp_helper.h | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h > index 8364502f92cf..8336d960da7f 100644 > --- a/include/drm/drm_dp_helper.h > +++ b/include/drm/drm_dp_helper.h > @@ -134,6 +134,32 @@ > #define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ > # define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ > > +/** Link Training (LT)-tunable Physical Repeaters - DP 1.4 **/ > +#define DP_LTTPR_REV 0xf0000 > +#define DP_LTTPR_MAX_LINK_RATE 0xf0001 > +#define DP_LTTPR_REPEATER_CNT 0xf0002 > +#define DP_LTTPR_REPEATER_MODE 0xf0003 > +#define DP_LTTPR_MAX_LANE_CNT 0xf0004 > +#define DP_LTTPR_EXTENDED_WAIT_TIMEOUT 0xf0005 > +#define DP_LTTPR_TRAINING_PATTERN_SET_REPEATER1 0xf0010 > +#define DP_LTTPR_TRAINING_LANE0_SET_REPEATER1 0xf0011 > +#define DP_LTTPR_TRAINING_LANE1_SET_REPEATER1 0xf0012 > +#define DP_LTTPR_TRAINING_LANE2_SET_REPEATER1 0xf0013 > +#define DP_LTTPR_TRAINING_LANE3_SET_REPEATER1 0xf0014 Can we align the register naming with the spec and to align with the rest of this file? The seem to take the form of DP_<name-from-spec> E.g. call this one DP_TRAINING_LANE3_SET_PHY_REPEATER1 Same for all other registers. Keeping the naming consistent makes it easier to search. > +#define DP_LTTPR_TRAINING_AUX_RD_INTERVAL_REPEATER1 0xf0020 > +#define DP_LTTPR_TRANSMITTER_CAPABILITY_REPEATER1 0xf0021 > +#define DP_LTTPR_LANE0_1_STATUS_REPEATER1 0xf0030 > +#define DP_LTTPR_LANE2_3_STATUS_REPEATER1 0xf0031 > +#define DP_LTTPR_LANE_ALIGN_STATUS_UPDATED_REPEATER1 0xf0032 > +#define DP_LTTPR_ADJUST_REQUEST_LANE0_1_REPEATER1 0xf0033 > +#define DP_LTTPR_ADJUST_REQUEST_LANE2_3_REPEATER1 0xf0034 > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE0_REPEATER1 0xf0035 > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE1_REPEATER1 0xf0037 > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE2_REPEATER1 0xf0039 > +#define DP_LTTPR_SYMBOL_ERROR_COUNT_LANE3_REPEATER1 0xf003b > +#define DP_REPEATER_CONFIGURATION_AND_STATUS_OFFSET 0x50 With a cursory search I can't seem to find this in the spec. Where is this coming from? Harry > +#define DP_LTTPR_FEC_STATUS_REPEATER1 0xf0290> + > /* Multiple stream transport */ > #define DP_FAUX_CAP 0x020 /* 1.2 */ > # define DP_FAUX_CAP_1 (1 << 0) >
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
