On 19. 7. 26. 오후 7:42, Krzysztof Kozlowski wrote:
> On Thu, 25 Jul 2019 at 14:44, Chanwoo Choi <cwchoi00@xxxxxxxxx> wrote:
>>
>> 2019년 7월 24일 (수) 오전 8:09, Artur Świgoń <a.swigon@xxxxxxxxxxxxxxxxxxx>님이 작성:
>>>
>>> This patch adds a new static function, exynos_bus_profile_init(), extracted
>>> from exynos_bus_probe().
>>>
>>> Signed-off-by: Artur Świgoń <a.swigon@xxxxxxxxxxxxxxxxxxx>
>>> ---
>>> drivers/devfreq/exynos-bus.c | 106 ++++++++++++++++++++---------------
>>> 1 file changed, 60 insertions(+), 46 deletions(-)
>>>
>>> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
>>> index d9f377912c10..d8f1efaf2d49 100644
>>> --- a/drivers/devfreq/exynos-bus.c
>>> +++ b/drivers/devfreq/exynos-bus.c
>>> @@ -372,12 +372,69 @@ static int exynos_bus_parse_of(struct device_node *np,
>>> return ret;
>>> }
>>>
>>> +static int exynos_bus_profile_init(struct exynos_bus *bus,
>>> + struct devfreq_dev_profile *profile)
>>> +{
>>> + struct device *dev = bus->dev;
>>> + struct devfreq_simple_ondemand_data *ondemand_data;
>>> + int ret;
>>> +
>>> + /* Initialize the struct profile and governor data for parent device */
>>> + profile->polling_ms = 50;
>>> + profile->target = exynos_bus_target;
>>> + profile->get_dev_status = exynos_bus_get_dev_status;
>>> + profile->exit = exynos_bus_exit;
>>> +
>>> + ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
>>> + if (!ondemand_data) {
>>> + ret = -ENOMEM;
>>> + goto err;
>>> + }
>>> + ondemand_data->upthreshold = 40;
>>> + ondemand_data->downdifferential = 5;
>>> +
>>> + /* Add devfreq device to monitor and handle the exynos bus */
>>> + bus->devfreq = devm_devfreq_add_device(dev, profile,
>>> + DEVFREQ_GOV_SIMPLE_ONDEMAND,
>>> + ondemand_data);
>>> + if (IS_ERR(bus->devfreq)) {
>>> + dev_err(dev, "failed to add devfreq device\n");
>>> + ret = PTR_ERR(bus->devfreq);
>>> + goto err;
>>> + }
>>> +
>>> + /* Register opp_notifier to catch the change of OPP */
>>> + ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to register opp notifier\n");
>>> + goto err;
>>> + }
>>> +
>>> + /*
>>> + * Enable devfreq-event to get raw data which is used to determine
>>> + * current bus load.
>>> + */
>>> + ret = exynos_bus_enable_edev(bus);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to enable devfreq-event devices\n");
>>> + goto err;
>>> + }
>>> +
>>> + ret = exynos_bus_set_event(bus);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to set event to devfreq-event devices\n");
>>> + goto err;
>>> + }
>>> +
>>> +err:
>>> + return ret;
>>> +}
>>> +
>>> static int exynos_bus_probe(struct platform_device *pdev)
>>> {
>>> struct device *dev = &pdev->dev;
>>> struct device_node *np = dev->of_node, *node;
>>> struct devfreq_dev_profile *profile;
>>> - struct devfreq_simple_ondemand_data *ondemand_data;
>>> struct devfreq_passive_data *passive_data;
>>> struct devfreq *parent_devfreq;
>>> struct exynos_bus *bus;
>>> @@ -418,52 +475,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
>>> if (ret < 0)
>>> goto err;
>>>
>>> - /* Initialize the struct profile and governor data for parent device */
>>> - profile->polling_ms = 50;
>>> - profile->target = exynos_bus_target;
>>> - profile->get_dev_status = exynos_bus_get_dev_status;
>>> - profile->exit = exynos_bus_exit;
>>> -
>>> - ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
>>> - if (!ondemand_data) {
>>> - ret = -ENOMEM;
>>> + ret = exynos_bus_profile_init(bus, profile);
>>> + if (ret < 0)
>>> goto err;
>>> - }
>>> - ondemand_data->upthreshold = 40;
>>> - ondemand_data->downdifferential = 5;
>>> -
>>> - /* Add devfreq device to monitor and handle the exynos bus */
>>> - bus->devfreq = devm_devfreq_add_device(dev, profile,
>>> - DEVFREQ_GOV_SIMPLE_ONDEMAND,
>>> - ondemand_data);
>>> - if (IS_ERR(bus->devfreq)) {
>>> - dev_err(dev, "failed to add devfreq device\n");
>>> - ret = PTR_ERR(bus->devfreq);
>>> - goto err;
>>> - }
>>> -
>>> - /* Register opp_notifier to catch the change of OPP */
>>> - ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
>>> - if (ret < 0) {
>>> - dev_err(dev, "failed to register opp notifier\n");
>>> - goto err;
>>> - }
>>> -
>>> - /*
>>> - * Enable devfreq-event to get raw data which is used to determine
>>> - * current bus load.
>>> - */
>>> - ret = exynos_bus_enable_edev(bus);
>>> - if (ret < 0) {
>>> - dev_err(dev, "failed to enable devfreq-event devices\n");
>>> - goto err;
>>> - }
>>> -
>>> - ret = exynos_bus_set_event(bus);
>>> - if (ret < 0) {
>>> - dev_err(dev, "failed to set event to devfreq-event devices\n");
>>> - goto err;
>>> - }
>>>
>>> goto out;
>>> passive:
>>> --
>>> 2.17.1
>>>
>>
>> NACK.
>>
>> It has not any benefit and I don't understand reason why it is necessary.
>> I don't agree. Please drop it.
>
> The probe has 12 local variables and around 140 lines of code (so much
> more than coding style recommendations). Therefore splitting some
> logical part out of probe to make code better organized and more
> readable is pretty obvious benefit.
After checked the patch3, I changed my opinion. It seems more simple than before
and I replied on patch3. But, I think that can merge patch1/2/2 to one patch.
--
Best Regards,
Chanwoo Choi
Samsung Electronics
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
