On Thu, 25 Jul 2019 at 14:44, Chanwoo Choi <cwchoi00@xxxxxxxxx> wrote:
>
> 2019년 7월 24일 (수) 오전 8:09, Artur Świgoń <a.swigon@xxxxxxxxxxxxxxxxxxx>님이 작성:
> >
> > This patch adds a new static function, exynos_bus_profile_init(), extracted
> > from exynos_bus_probe().
> >
> > Signed-off-by: Artur Świgoń <a.swigon@xxxxxxxxxxxxxxxxxxx>
> > ---
> > drivers/devfreq/exynos-bus.c | 106 ++++++++++++++++++++---------------
> > 1 file changed, 60 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> > index d9f377912c10..d8f1efaf2d49 100644
> > --- a/drivers/devfreq/exynos-bus.c
> > +++ b/drivers/devfreq/exynos-bus.c
> > @@ -372,12 +372,69 @@ static int exynos_bus_parse_of(struct device_node *np,
> > return ret;
> > }
> >
> > +static int exynos_bus_profile_init(struct exynos_bus *bus,
> > + struct devfreq_dev_profile *profile)
> > +{
> > + struct device *dev = bus->dev;
> > + struct devfreq_simple_ondemand_data *ondemand_data;
> > + int ret;
> > +
> > + /* Initialize the struct profile and governor data for parent device */
> > + profile->polling_ms = 50;
> > + profile->target = exynos_bus_target;
> > + profile->get_dev_status = exynos_bus_get_dev_status;
> > + profile->exit = exynos_bus_exit;
> > +
> > + ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
> > + if (!ondemand_data) {
> > + ret = -ENOMEM;
> > + goto err;
> > + }
> > + ondemand_data->upthreshold = 40;
> > + ondemand_data->downdifferential = 5;
> > +
> > + /* Add devfreq device to monitor and handle the exynos bus */
> > + bus->devfreq = devm_devfreq_add_device(dev, profile,
> > + DEVFREQ_GOV_SIMPLE_ONDEMAND,
> > + ondemand_data);
> > + if (IS_ERR(bus->devfreq)) {
> > + dev_err(dev, "failed to add devfreq device\n");
> > + ret = PTR_ERR(bus->devfreq);
> > + goto err;
> > + }
> > +
> > + /* Register opp_notifier to catch the change of OPP */
> > + ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to register opp notifier\n");
> > + goto err;
> > + }
> > +
> > + /*
> > + * Enable devfreq-event to get raw data which is used to determine
> > + * current bus load.
> > + */
> > + ret = exynos_bus_enable_edev(bus);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to enable devfreq-event devices\n");
> > + goto err;
> > + }
> > +
> > + ret = exynos_bus_set_event(bus);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to set event to devfreq-event devices\n");
> > + goto err;
> > + }
> > +
> > +err:
> > + return ret;
> > +}
> > +
> > static int exynos_bus_probe(struct platform_device *pdev)
> > {
> > struct device *dev = &pdev->dev;
> > struct device_node *np = dev->of_node, *node;
> > struct devfreq_dev_profile *profile;
> > - struct devfreq_simple_ondemand_data *ondemand_data;
> > struct devfreq_passive_data *passive_data;
> > struct devfreq *parent_devfreq;
> > struct exynos_bus *bus;
> > @@ -418,52 +475,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
> > if (ret < 0)
> > goto err;
> >
> > - /* Initialize the struct profile and governor data for parent device */
> > - profile->polling_ms = 50;
> > - profile->target = exynos_bus_target;
> > - profile->get_dev_status = exynos_bus_get_dev_status;
> > - profile->exit = exynos_bus_exit;
> > -
> > - ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
> > - if (!ondemand_data) {
> > - ret = -ENOMEM;
> > + ret = exynos_bus_profile_init(bus, profile);
> > + if (ret < 0)
> > goto err;
> > - }
> > - ondemand_data->upthreshold = 40;
> > - ondemand_data->downdifferential = 5;
> > -
> > - /* Add devfreq device to monitor and handle the exynos bus */
> > - bus->devfreq = devm_devfreq_add_device(dev, profile,
> > - DEVFREQ_GOV_SIMPLE_ONDEMAND,
> > - ondemand_data);
> > - if (IS_ERR(bus->devfreq)) {
> > - dev_err(dev, "failed to add devfreq device\n");
> > - ret = PTR_ERR(bus->devfreq);
> > - goto err;
> > - }
> > -
> > - /* Register opp_notifier to catch the change of OPP */
> > - ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
> > - if (ret < 0) {
> > - dev_err(dev, "failed to register opp notifier\n");
> > - goto err;
> > - }
> > -
> > - /*
> > - * Enable devfreq-event to get raw data which is used to determine
> > - * current bus load.
> > - */
> > - ret = exynos_bus_enable_edev(bus);
> > - if (ret < 0) {
> > - dev_err(dev, "failed to enable devfreq-event devices\n");
> > - goto err;
> > - }
> > -
> > - ret = exynos_bus_set_event(bus);
> > - if (ret < 0) {
> > - dev_err(dev, "failed to set event to devfreq-event devices\n");
> > - goto err;
> > - }
> >
> > goto out;
> > passive:
> > --
> > 2.17.1
> >
>
> NACK.
>
> It has not any benefit and I don't understand reason why it is necessary.
> I don't agree. Please drop it.
The probe has 12 local variables and around 140 lines of code (so much
more than coding style recommendations). Therefore splitting some
logical part out of probe to make code better organized and more
readable is pretty obvious benefit.
Best regards,
Krzysztof
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
