On Thu, Nov 01, 2018 at 04:34:42PM +0200, Stefan Mavrodiev wrote: > On 7/16/18 6:08 PM, Rob Herring wrote: > > On Thu, Jul 12, 2018 at 11:21:53AM +0300, Stefan Mavrodiev wrote: > > > This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The > > > panel is used with different LCDs (currently from 480x272 to 1280x800). > > > Small EEPROM chip is used for identification, which holds some > > > factory data and timing requirements. > > > > > > Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx> > > > --- > > > Changes for v3: > > > - Change module license from "GPL v2" to "GPL" > > > - Make use of backlight_enable()/backlight_disable() helpers > > > - Rework backlight device request > > > - Remove drm_panel_detach() > > > - Use module_i2c_driver() for initialization > > > - Make the first mode preferred > > > - If num_modes value is invalid, overwrite it with 4, which is the maximum > > > - Some variable types optimizations > > > > > > Changes for v2: > > > - Changed lcd_olinuxino_funcs to static const > > > > > > .../display/panel/olimex,lcd-olinuxino.txt | 42 +++ > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > > > MAINTAINERS | 6 + > > > drivers/gpu/drm/panel/Kconfig | 10 + > > > drivers/gpu/drm/panel/Makefile | 1 + > > > drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 331 +++++++++++++++++++++ > > > 5 files changed, 390 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt > > > create mode 100644 drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c > > I would like to ask if there will be any progress on this patch? Thierry needs to pick this one up. At this point you need to re-send. No one is going to look at patches 4 months old. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
