On Thu, Jul 12, 2018 at 11:21:53AM +0300, Stefan Mavrodiev wrote: > This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The > panel is used with different LCDs (currently from 480x272 to 1280x800). > Small EEPROM chip is used for identification, which holds some > factory data and timing requirements. > > Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx> > --- > Changes for v3: > - Change module license from "GPL v2" to "GPL" > - Make use of backlight_enable()/backlight_disable() helpers > - Rework backlight device request > - Remove drm_panel_detach() > - Use module_i2c_driver() for initialization > - Make the first mode preferred > - If num_modes value is invalid, overwrite it with 4, which is the maximum > - Some variable types optimizations > > Changes for v2: > - Changed lcd_olinuxino_funcs to static const > > .../display/panel/olimex,lcd-olinuxino.txt | 42 +++ Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > MAINTAINERS | 6 + > drivers/gpu/drm/panel/Kconfig | 10 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 331 +++++++++++++++++++++ > 5 files changed, 390 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt > create mode 100644 drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
