On 7/16/18 6:08 PM, Rob Herring wrote:
On Thu, Jul 12, 2018 at 11:21:53AM +0300, Stefan Mavrodiev wrote:
This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The
panel is used with different LCDs (currently from 480x272 to 1280x800).
Small EEPROM chip is used for identification, which holds some
factory data and timing requirements.
Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx>
---
Changes for v3:
- Change module license from "GPL v2" to "GPL"
- Make use of backlight_enable()/backlight_disable() helpers
- Rework backlight device request
- Remove drm_panel_detach()
- Use module_i2c_driver() for initialization
- Make the first mode preferred
- If num_modes value is invalid, overwrite it with 4, which is the maximum
- Some variable types optimizations
Changes for v2:
- Changed lcd_olinuxino_funcs to static const
.../display/panel/olimex,lcd-olinuxino.txt | 42 +++
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
MAINTAINERS | 6 +
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 331 +++++++++++++++++++++
5 files changed, 390 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
create mode 100644 drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
I would like to ask if there will be any progress on this patch?
Best regards,
Stefan Mavrodiev
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
