On Thu, 2017-12-21 at 13:37 +0100, Maarten Lankhorst wrote:
> Hey,
>
> Op 19-12-17 om 06:26 schreef Dhinakaran Pandiyan:
> > Convert the power_domains->domain_use_count array that tracks per-domain
> > use count to atomic_t type. This is needed to be able to read/write the use
> > counts outside of the power domain mutex.
> >
> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
> > drivers/gpu/drm/i915/i915_drv.h | 2 +-
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++------
> > 3 files changed, 7 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 1a7b28f62570..1f1d9162f2c2 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -2764,7 +2764,7 @@ static int i915_power_domain_info(struct seq_file *m, void *unused)
> > for_each_power_domain(power_domain, power_well->domains)
> > seq_printf(m, " %-23s %d\n",
> > intel_display_power_domain_str(power_domain),
> > - power_domains->domain_use_count[power_domain]);
> > + atomic_read(&power_domains->domain_use_count[power_domain]));
> > }
> >
> > mutex_unlock(&power_domains->lock);
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 1e4e613e7b41..ddadeb9eaf49 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1489,7 +1489,7 @@ struct i915_power_domains {
> > int power_well_count;
> >
> > struct mutex lock;
> > - int domain_use_count[POWER_DOMAIN_NUM];
> > + atomic_t domain_use_count[POWER_DOMAIN_NUM];
> > struct i915_power_well *power_wells;
> > };
> >
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index 96ab74f3d101..992caec1fbc4 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -1453,7 +1453,7 @@ __intel_display_power_get_domain(struct drm_i915_private *dev_priv,
> > for_each_power_domain_well(dev_priv, power_well, BIT_ULL(domain))
> > intel_power_well_get(dev_priv, power_well);
> >
> > - power_domains->domain_use_count[domain]++;
> > + atomic_inc(&power_domains->domain_use_count[domain]);
> > }
> >
> > /**
> > @@ -1539,10 +1539,9 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
> >
> > mutex_lock(&power_domains->lock);
> >
> > - WARN(!power_domains->domain_use_count[domain],
> > - "Use count on domain %s is already zero\n",
> > + WARN(atomic_dec_return(&power_domains->domain_use_count[domain]) < 0,
> > + "Use count on domain %s was already zero\n",
> > intel_display_power_domain_str(domain));
> > - power_domains->domain_use_count[domain]--;
> >
> > for_each_power_domain_well_rev(dev_priv, power_well, BIT_ULL(domain))
> > intel_power_well_put(dev_priv, power_well);
> > @@ -3049,7 +3048,7 @@ static void intel_power_domains_dump_info(struct drm_i915_private *dev_priv)
> > for_each_power_domain(domain, power_well->domains)
> > DRM_DEBUG_DRIVER(" %-23s %d\n",
> > intel_display_power_domain_str(domain),
> > - power_domains->domain_use_count[domain]);
> > + atomic_read(&power_domains->domain_use_count[domain]));
> > }
> > }
> >
> > @@ -3092,7 +3091,7 @@ void intel_power_domains_verify_state(struct drm_i915_private *dev_priv)
> >
> > domains_count = 0;
> > for_each_power_domain(domain, power_well->domains)
> > - domains_count += power_domains->domain_use_count[domain];
> > + domains_count += atomic_read(&power_domains->domain_use_count[domain]);
> >
> > if (power_well->count != domains_count) {
> > DRM_ERROR("power well %s refcount/domain refcount mismatch "
>
> I can imagine this will start failing really badly. The previous code assumed that
> everything is protected by power_domains->lock, and now this changes makes it no
> longer the case..
>
This won't fail until the next patch where it is read outside of the
mutex. And that patch reads these values within the new spin_lock. I was
trying to split the changes so that the next patch does not become too
heavy.
> I see the rest of the code changes things even more, but it would be better if the
> locking rework was done in a single patch, and not bolted on..
>
I see your point, I can squash them together.
> And instead of using atomic_t, there is a refcount implementation in refcount.h,
> it could be used here for locking power wells only if it would drop to zero..
>
So, the power_wells have another refcount (controls the power well
enable and disable), which needs the lock. Not very clear why we need to
lock the power wells if the domain_use_count goes to zero. The
domain_use_count array that I am converting over to atomic_t is used for
debug and verifying that the power well users are accounted for. It does
not control any hardware state. And the reason I am converting it to
atomic_t is to update it outside the spin locks. Let me know if my
understand is wrong.
> Cheers,
> Maarten
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
