Stopping the X display manager on a kevin platform results in the following crash: [ 674.833536] Synchronous External Abort: synchronous external abort (0x96000010) at 0xffff00000c970640 [ 674.843886] Internal error: : 96000010 [#1] PREEMPT SMP [ 674.849744] Modules linked in: [ 674.849755] CPU: 1 PID: 86 Comm: kworker/1:1 Not tainted 4.15.0-rc3-00057-gff24f8cf492d-dirty #3 [ 674.849760] detected fb_set_par error, error code: -16 [ 674.849761] Hardware name: Google Kevin (DT) [ 674.849773] Workqueue: events analogix_dp_psr_work [ 674.849778] pstate: 60000005 (nZCv daif -PAN -UAO) [ 674.849784] pc : analogix_dp_send_psr_spd+0x8/0x168 [ 674.849788] lr : analogix_dp_enable_psr+0x54/0x60 [ 674.849789] sp : ffff000009b2bd60 [ 674.849790] x29: ffff000009b2bd60 x28: 0000000000000000 [ 674.849794] x27: ffff000009913d20 x26: ffff00000900fbf0 [ 674.849797] x25: ffff8000f1b30000 x24: ffff8000f0c21d98 [ 674.849800] x23: 0000000000000000 x22: ffff8000f7d3aa00 [ 674.849803] x21: ffff8000f7d36980 x20: ffff8000f0c21c18 [ 674.849806] x19: ffff8000f0c21db8 x18: 0000000000000001 [ 674.849809] x17: 0000ffff89f2ed58 x16: ffff000008222908 [ 674.849812] x15: 0000000000000000 x14: 0000000000000400 [ 674.849815] x13: 0000000000000400 x12: 0000000000000000 [ 674.849817] x11: 0000000000001414 x10: 0000000000000a00 [ 674.849820] x9 : ffff000009b2bbb0 x8 : ffff8000f1b30a60 [ 674.849823] x7 : 0000000000080000 x6 : 0000000000000001 [ 674.849826] x5 : 0000000000000010 x4 : 0000000000000007 [ 674.849829] x3 : 0000000000000002 x2 : ffff00000c970640 [ 674.849832] x1 : ffff000009b2bd78 x0 : ffff8000f1624018 [ 674.849836] Process kworker/1:1 (pid: 86, stack limit = 0x0000000083e5f7c3) [ 674.849838] Call trace: [ 674.849842] analogix_dp_send_psr_spd+0x8/0x168 [ 674.849844] analogix_dp_psr_work+0x9c/0xa0 [ 674.849849] process_one_work+0x1cc/0x328 [ 674.849852] worker_thread+0x50/0x450 [ 674.849856] kthread+0xf8/0x128 [ 674.849860] ret_from_fork+0x10/0x18 [ 674.849864] Code: b9000001 d65f03c0 f9445802 91190042 (b9400042) Further investigation show that this happens because the the workqueue races with the analogix_dp_bridge_disable() call from the core DRM code, and end up trying to write to the DP bridge that has already been powered down. This result is a very black screen, and a hard reset. Instead of counting on luck to keep the bridge alive, let's use the pm_runtime framework and take a reference on the device when we're about to poke it. That is a fairly big hammer, but one that allows the system to stay alive across dozens of X start/stop sequences. Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx> --- drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index 08743ad96cb9..7f2c190f75e7 100644 --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c @@ -14,6 +14,7 @@ #include <linux/component.h> #include <linux/mfd/syscon.h> +#include <linux/pm_runtime.h> #include <linux/of_device.h> #include <linux/of_graph.h> #include <linux/regmap.h> @@ -113,10 +114,12 @@ static void analogix_dp_psr_work(struct work_struct *work) } mutex_lock(&dp->psr_lock); + pm_runtime_get_sync(dp->dev); if (dp->psr_state == EDP_VSC_PSR_STATE_ACTIVE) analogix_dp_enable_psr(dp->dev); else analogix_dp_disable_psr(dp->dev); + pm_runtime_put_sync(dp->dev); mutex_unlock(&dp->psr_lock); } -- 2.14.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
