于 2017年8月3日 GMT+08:00 上午3:06:26, "Jernej Škrabec" <jernej.skrabec@xxxxxxxx> 写到: >Hi, > >Dne sreda, 02. avgust 2017 ob 07:02:39 CEST je icenowy@xxxxxxx >napisal(a): >> 在 2017-08-02 12:53，Jernej Škrabec 写道： >> >> > Hi Icenowy, >> > >> > Dne torek, 01. avgust 2017 ob 15:12:52 CEST je Icenowy Zheng >> > >> > napisal(a): >> >> Allwinner H3 features a "Display Engine 2.0". >> >> >> >> Add device tree bindings for the following parts: >> >> - H3 TCONs >> >> - H3 Mixers >> >> - H3 Display engine >> >> >> >> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> >> >> --- >> >> >> >> .../bindings/display/sunxi/sun4i-drm.txt | 25 >> >> >> >> ++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 >> >> deletions(-) >> >> >> >> diff --git >> >> a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt >> >> b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt >index >> >> 2ee6ff0ef98e..92512953943e 100644 >> >> --- >a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt >> >> +++ >b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt >> >> >> >> @@ -87,18 +87,17 @@ Required properties: >> >> * allwinner,sun6i-a31-tcon >> >> * allwinner,sun6i-a31s-tcon >> >> * allwinner,sun8i-a33-tcon >> >> >> >> + * allwinner,sun8i-h3-tcon >> >> >> >> * allwinner,sun8i-v3s-tcon >> >> >> >> - reg: base address and size of memory-mapped region >> >> - interrupts: interrupt associated to this IP >> >> >> >> - clocks: phandles to the clocks feeding the TCON. Three are >needed: >> >> - 'ahb': the interface clocks >> >> >> >> - - 'tcon-ch0': The clock driving the TCON channel 0 >> >> >> >> - resets: phandles to the reset controllers driving the encoder >> >> >> >> - "lcd": the reset line for the TCON channel 0 >> >> >> >> - clock-names: the clock names mentioned above >> >> - reset-names: the reset names mentioned above >> >> >> >> - - clock-output-names: Name of the pixel clock created >> >> >> >> - ports: A ports node with endpoint definitions as defined in >> >> >> >> Documentation/devicetree/bindings/media/video-interfaces.txt. >The >> >> >> >> @@ -112,7 +111,23 @@ Required properties: >> >> channel the endpoint is associated to. If that property is not >> >> present, the endpoint number will be used as the channel >number. >> >> >> >> -On SoCs other than the A33 and V3s, there is one more clock >required: >> >> +For the following compatibles: >> >> + * allwinner,sun5i-a13-tcon >> >> + * allwinner,sun6i-a31-tcon >> >> + * allwinner,sun6i-a31s-tcon >> >> + * allwinner,sun8i-a33-tcon >> >> + * allwinner,sun8i-v3s-tcon >> >> +there is one more clock and one more property required: >> >> + - clocks: >> >> + - 'tcon-ch0': The clock driving the TCON channel 0 >> >> + - clock-output-names: Name of the pixel clock created >> >> + >> >> +For the following compatibles: >> >> + * allwinner,sun5i-a13-tcon >> >> + * allwinner,sun6i-a31-tcon >> >> + * allwinner,sun6i-a31s-tcon >> >> + * allwinner,sun8i-h3-tcon >> >> >> >> +there is one more clock required: >> >> - 'tcon-ch1': The clock driving the TCON channel 1 >> >> >> >> DRC >> >> >> >> @@ -207,6 +222,8 @@ supported. >> >> >> >> Required properties: >> >> - compatible: value must be one of: >> >> * allwinner,sun8i-v3s-de2-mixer >> >> >> >> + * allwinner,sun8i-h3-de2-mixer0 >> >> + * allwinner,sun8i-h3-de2-mixer1 >> > >> > About that, I concur with Maxime here, plane number properties >would be >> > better. If we don't do this now, we will never have it. >> >> But I still prefer different compatibles, as the capabilities are >> already >> proven to be different between mixer0 and mixer1, and furtherly we >> cannot >> promise Allwinner won't add more functions only available at mixer0. >> >> Then we will be trapped into a situation that we describe more and >more >> functions via properties, but they should be encoded into the >> compatible. > >It is either multiple compatibles or multiple properties. I prefer the >later, >but it is up to maintainers to decide. > >Anyway, I think DE2 will not evolve much since DE3 is almost ready >(H6). At >least basics seems to be similar according to a BSP code drop. According to what I heard from TL Lim, DE3 is just an evolution to DE2. > >Regards, >Jernej > >> >> > Reference: >> > >http://lists.infradead.org/pipermail/linux-arm-kernel/2017-June/512902.htm >> > l >> > >> > Regards, >> > Jernej >> >> -- >> You received this message because you are subscribed to the Google >Groups >> "linux-sunxi" group. To unsubscribe from this group and stop >receiving >> emails from it, send an email to >linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. >> For more options, visit https://groups.google.com/d/optout. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
