在 2017-08-02 12:53，Jernej Škrabec 写道：
Hi Icenowy,
Dne torek, 01. avgust 2017 ob 15:12:52 CEST je Icenowy Zheng
napisal(a):
Allwinner H3 features a "Display Engine 2.0".
Add device tree bindings for the following parts:
- H3 TCONs
- H3 Mixers
- H3 Display engine
Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
.../bindings/display/sunxi/sun4i-drm.txt | 25
++++++++++++++++++---- 1 file changed, 21 insertions(+), 4
deletions(-)
diff --git
a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index
2ee6ff0ef98e..92512953943e 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -87,18 +87,17 @@ Required properties:
* allwinner,sun6i-a31-tcon
* allwinner,sun6i-a31s-tcon
* allwinner,sun8i-a33-tcon
+ * allwinner,sun8i-h3-tcon
* allwinner,sun8i-v3s-tcon
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the TCON. Three are needed:
- 'ahb': the interface clocks
- - 'tcon-ch0': The clock driving the TCON channel 0
- resets: phandles to the reset controllers driving the encoder
- "lcd": the reset line for the TCON channel 0
- clock-names: the clock names mentioned above
- reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
@@ -112,7 +111,23 @@ Required properties:
channel the endpoint is associated to. If that property is not
present, the endpoint number will be used as the channel number.
-On SoCs other than the A33 and V3s, there is one more clock required:
+For the following compatibles:
+ * allwinner,sun5i-a13-tcon
+ * allwinner,sun6i-a31-tcon
+ * allwinner,sun6i-a31s-tcon
+ * allwinner,sun8i-a33-tcon
+ * allwinner,sun8i-v3s-tcon
+there is one more clock and one more property required:
+ - clocks:
+ - 'tcon-ch0': The clock driving the TCON channel 0
+ - clock-output-names: Name of the pixel clock created
+
+For the following compatibles:
+ * allwinner,sun5i-a13-tcon
+ * allwinner,sun6i-a31-tcon
+ * allwinner,sun6i-a31s-tcon
+ * allwinner,sun8i-h3-tcon
+there is one more clock required:
- 'tcon-ch1': The clock driving the TCON channel 1
DRC
@@ -207,6 +222,8 @@ supported.
Required properties:
- compatible: value must be one of:
* allwinner,sun8i-v3s-de2-mixer
+ * allwinner,sun8i-h3-de2-mixer0
+ * allwinner,sun8i-h3-de2-mixer1
About that, I concur with Maxime here, plane number properties would be
better. If we don't do this now, we will never have it.
But I still prefer different compatibles, as the capabilities are
already
proven to be different between mixer0 and mixer1, and furtherly we
cannot
promise Allwinner won't add more functions only available at mixer0.
Then we will be trapped into a situation that we describe more and more
functions via properties, but they should be encoded into the
compatible.
Reference:
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-June/512902.html
Regards,
Jernej
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
