Hi, Dne sreda, 02. avgust 2017 ob 07:02:39 CEST je icenowy@xxxxxxx napisal(a): > 在 2017-08-02 12:53，Jernej Škrabec 写道： > > > Hi Icenowy, > > > > Dne torek, 01. avgust 2017 ob 15:12:52 CEST je Icenowy Zheng > > > > napisal(a): > >> Allwinner H3 features a "Display Engine 2.0". > >> > >> Add device tree bindings for the following parts: > >> - H3 TCONs > >> - H3 Mixers > >> - H3 Display engine > >> > >> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > >> --- > >> > >> .../bindings/display/sunxi/sun4i-drm.txt | 25 > >> > >> ++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 > >> deletions(-) > >> > >> diff --git > >> a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > >> b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index > >> 2ee6ff0ef98e..92512953943e 100644 > >> --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > >> +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > >> > >> @@ -87,18 +87,17 @@ Required properties: > >> * allwinner,sun6i-a31-tcon > >> * allwinner,sun6i-a31s-tcon > >> * allwinner,sun8i-a33-tcon > >> > >> + * allwinner,sun8i-h3-tcon > >> > >> * allwinner,sun8i-v3s-tcon > >> > >> - reg: base address and size of memory-mapped region > >> - interrupts: interrupt associated to this IP > >> > >> - clocks: phandles to the clocks feeding the TCON. Three are needed: > >> - 'ahb': the interface clocks > >> > >> - - 'tcon-ch0': The clock driving the TCON channel 0 > >> > >> - resets: phandles to the reset controllers driving the encoder > >> > >> - "lcd": the reset line for the TCON channel 0 > >> > >> - clock-names: the clock names mentioned above > >> - reset-names: the reset names mentioned above > >> > >> - - clock-output-names: Name of the pixel clock created > >> > >> - ports: A ports node with endpoint definitions as defined in > >> > >> Documentation/devicetree/bindings/media/video-interfaces.txt. The > >> > >> @@ -112,7 +111,23 @@ Required properties: > >> channel the endpoint is associated to. If that property is not > >> present, the endpoint number will be used as the channel number. > >> > >> -On SoCs other than the A33 and V3s, there is one more clock required: > >> +For the following compatibles: > >> + * allwinner,sun5i-a13-tcon > >> + * allwinner,sun6i-a31-tcon > >> + * allwinner,sun6i-a31s-tcon > >> + * allwinner,sun8i-a33-tcon > >> + * allwinner,sun8i-v3s-tcon > >> +there is one more clock and one more property required: > >> + - clocks: > >> + - 'tcon-ch0': The clock driving the TCON channel 0 > >> + - clock-output-names: Name of the pixel clock created > >> + > >> +For the following compatibles: > >> + * allwinner,sun5i-a13-tcon > >> + * allwinner,sun6i-a31-tcon > >> + * allwinner,sun6i-a31s-tcon > >> + * allwinner,sun8i-h3-tcon > >> > >> +there is one more clock required: > >> - 'tcon-ch1': The clock driving the TCON channel 1 > >> > >> DRC > >> > >> @@ -207,6 +222,8 @@ supported. > >> > >> Required properties: > >> - compatible: value must be one of: > >> * allwinner,sun8i-v3s-de2-mixer > >> > >> + * allwinner,sun8i-h3-de2-mixer0 > >> + * allwinner,sun8i-h3-de2-mixer1 > > > > About that, I concur with Maxime here, plane number properties would be > > better. If we don't do this now, we will never have it. > > But I still prefer different compatibles, as the capabilities are > already > proven to be different between mixer0 and mixer1, and furtherly we > cannot > promise Allwinner won't add more functions only available at mixer0. > > Then we will be trapped into a situation that we describe more and more > functions via properties, but they should be encoded into the > compatible. It is either multiple compatibles or multiple properties. I prefer the later, but it is up to maintainers to decide. Anyway, I think DE2 will not evolve much since DE3 is almost ready (H6). At least basics seems to be similar according to a BSP code drop. Regards, Jernej > > > Reference: > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-June/512902.htm > > l > > > > Regards, > > Jernej > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. To unsubscribe from this group and stop receiving > emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
