Dave, Marek, On 2016-12-14 13:25, Marek Vasut wrote: > On 12/14/2016 09:48 PM, Stefan Agner wrote: >> The DRM subsystem specifies the pixel clock polarity from a >> controllers perspective: DRM_BUS_FLAG_PIXDATA_NEGEDGE means >> the controller drives the data on pixel clocks falling edge. >> That is the controllers DOTCLK_POL=0 (Default is data launched >> at negative edge). >> >> Also change the data enable logic to be high active by default >> and only change if explicitly requested via bus_flags. With >> that defaults are: >> - Data enable: high active >> - Pixel clock polarity: controller drives data on negative edge >> >> Signed-off-by: Stefan Agner <stefan@xxxxxxxx> > > Acked-by: Marek Vasut <marex@xxxxxxx> > This seems not have made into drm-next yet. Not sure what the plan is here, who will pick this up? There is also another fix on ML for the same driver ("drm: mxsfb: Fix crash when provided invalid DT bindings"). -- Stefan >> --- >> Changes since v1: >> - Improved comments/fixed typo >> >> drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 11 +++++++++-- >> 1 file changed, 9 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c >> index 3770dd2..5556e53 100644 >> --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c >> +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c >> @@ -195,9 +195,16 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb) >> vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH; >> if (m->flags & DRM_MODE_FLAG_PVSYNC) >> vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH; >> - if (bus_flags & DRM_BUS_FLAG_DE_HIGH) >> + /* Make sure Data Enable is high active by default */ >> + if (!(bus_flags & DRM_BUS_FLAG_DE_LOW)) >> vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH; >> - if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) >> + /* >> + * DRM_BUS_FLAG_PIXDATA_ defines are controller centric, >> + * controllers VDCTRL0_DOTCLK is display centric. >> + * Drive on positive edge -> display samples on falling edge >> + * DRM_BUS_FLAG_PIXDATA_POSEDGE -> VDCTRL0_DOTCLK_ACT_FALLING >> + */ >> + if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) >> vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING; >> >> writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0); >> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel