On Wed, Jan 18, 2017 at 11:41 AM, Damien Lespiau <damien.lespiau@xxxxxxxxx> wrote: > On Wed, Jan 18, 2017 at 04:33:43PM +0000, Damien Lespiau wrote: >> On Wed, Jan 18, 2017 at 11:27:16AM -0500, Ilia Mirkin wrote: >> > Damien - did you ever test these mandatory modes on an actual >> > commercial 3D TV or similar device? >> >> My main testing device was a Samsung TV with this 3D_present bit set and >> all the advertised modes were working. Can't quite remember if that >> included the interleaved mode. > > I even pushed the EDID of that TV to edid-decode [1] if someone needs to > check that the EDID parsing is correct. It'd be interesting to see what > the tool has to say about the edid of the sink causing problems, in > particular compare the mandatory modes to the other modes advertised by > that TV. Maybe we could see some kind of pattern emerge, like the 3D > modes supported being the ones with the timings in table 8-15. This is Alastair's display (one of them): http://paste.lisp.org/display/335893 I believe this is the interesting part: Video data block VIC 16 1920x1080@60Hz VIC 31 1920x1080@50Hz VIC 5 1920x1080i@60Hz VIC 20 1920x1080i@50Hz VIC 4 1280x720@60Hz VIC 19 1280x720@50Hz VIC 3 720x480@60Hz VIC 2 720x480@60Hz VIC 18 720x576@50Hz VIC 17 720x576@50Hz VIC 7 1440x480i@60Hz VIC 6 1440x480i@60Hz VIC 22 1440x576i@50Hz VIC 21 1440x576i@50Hz VIC 32 1920x1080@24Hz VIC 1 640x480@60Hz ... Extended HDMI video details: 3D present Base EDID image size is in units of 1cm VIC index 2 supports side-by-side (half, horizontal) VIC index 3 supports side-by-side (half, horizontal) VIC index 4 supports side-by-side (half, horizontal) VIC index 5 supports side-by-side (half, horizontal) VIC index 14 supports side-by-side (half, horizontal) VIC index 0 supports top-and-bottom VIC index 1 supports top-and-bottom _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel