Re: [Freedreno] [PATCH] firmware: qcom_scm: Add set remote state API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 16, 2017 at 11:56:18PM -0600, Andy Gross wrote:
> This patch adds a set remote state SCM API.  This will be used by the
> Venus and GPU subsystems to set state on the remote processors.
> 
> This work was based on two patch sets by Jordan Crouse and Stanimir
> Varbanov.
> 
> Signed-off-by: Andy Gross <andy.gross@xxxxxxxxxx>

Acked-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>

> ---
>  drivers/firmware/qcom_scm-32.c | 18 ++++++++++++++++++
>  drivers/firmware/qcom_scm-64.c | 16 ++++++++++++++++
>  drivers/firmware/qcom_scm.c    |  6 ++++++
>  drivers/firmware/qcom_scm.h    |  2 ++
>  include/linux/qcom_scm.h       |  4 +++-
>  5 files changed, 45 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
> index c6aeedb..8ad226c 100644
> --- a/drivers/firmware/qcom_scm-32.c
> +++ b/drivers/firmware/qcom_scm-32.c
> @@ -560,3 +560,21 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
>  
>  	return ret ? : le32_to_cpu(out);
>  }
> +
> +int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
> +{
> +	struct {
> +		__le32 state;
> +		__le32 id;
> +	} req;
> +	__le32 scm_ret = 0;
> +	int ret;
> +
> +	req.state = cpu_to_le32(state);
> +	req.id = cpu_to_le32(id);
> +
> +	ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
> +			    &req, sizeof(req), &scm_ret, sizeof(scm_ret));
> +
> +	return ret ? : le32_to_cpu(scm_ret);
> +}
> diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
> index 4a0f5ea..4b220ab 100644
> --- a/drivers/firmware/qcom_scm-64.c
> +++ b/drivers/firmware/qcom_scm-64.c
> @@ -358,3 +358,19 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
>  
>  	return ret ? : res.a1;
>  }
> +
> +int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
> +{
> +	struct qcom_scm_desc desc = {0};
> +	struct arm_smccc_res res;
> +	int ret;
> +
> +	desc.args[0] = state;
> +	desc.args[1] = id;
> +	desc.arginfo = QCOM_SCM_ARGS(2);
> +
> +	ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
> +			    &desc, &res);
> +
> +	return ret ? : res.a1;
> +}
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 65d0d9d..d987bcc 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -324,6 +324,12 @@ bool qcom_scm_is_available(void)
>  }
>  EXPORT_SYMBOL(qcom_scm_is_available);
>  
> +int qcom_scm_set_remote_state(u32 state, u32 id)
> +{
> +	return __qcom_scm_set_remote_state(__scm->dev, state, id);
> +}
> +EXPORT_SYMBOL(qcom_scm_set_remote_state);
> +
>  static int qcom_scm_probe(struct platform_device *pdev)
>  {
>  	struct qcom_scm *scm;
> diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
> index 3584b00..6a0f154 100644
> --- a/drivers/firmware/qcom_scm.h
> +++ b/drivers/firmware/qcom_scm.h
> @@ -15,6 +15,8 @@
>  #define QCOM_SCM_SVC_BOOT		0x1
>  #define QCOM_SCM_BOOT_ADDR		0x1
>  #define QCOM_SCM_BOOT_ADDR_MC		0x11
> +#define QCOM_SCM_SET_REMOTE_STATE	0xa
> +extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
>  
>  #define QCOM_SCM_FLAG_HLOS		0x01
>  #define QCOM_SCM_FLAG_COLDBOOT_MC	0x02
> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
> index 7e004fb..d32f6f1 100644
> --- a/include/linux/qcom_scm.h
> +++ b/include/linux/qcom_scm.h
> @@ -39,6 +39,7 @@ extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
>  extern int qcom_scm_pas_shutdown(u32 peripheral);
>  extern void qcom_scm_cpu_power_down(u32 flags);
>  extern u32 qcom_scm_get_version(void);
> +extern int qcom_scm_set_remote_state(u32 state, u32 id);
>  #else
>  static inline
>  int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
> @@ -64,6 +65,7 @@ static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
>  static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
>  static inline void qcom_scm_cpu_power_down(u32 flags) {}
>  static inline u32 qcom_scm_get_version(void) { return 0; }
> +static inline u32
> +qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
>  #endif
> -
>  #endif
> -- 
> 1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux