Re: [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Archit,

Thank you for the patch.

On Tuesday 29 Nov 2016 11:37:41 Archit Taneja wrote:
> Add the regulator supply properties needed by ADV7511 and ADV7533.
> 
> The regulators are specified as optional properties since there can
> be boards which have a fixed supply directly routed to the pins, and
> these may not be modelled as regulator supplies.

That's why we have support for dummy supplies in the kernel, isn't it ? Isn't 
it better to make the supplies mandatory in the bindings (and obviously 
handling them as optional in the driver for backward-compatibility) ?

Apart from that,

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> Cc: devicetree@xxxxxxxxxxxxxxx
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> ---
> v3:
> - Revert back to having a common avdd-supply property for the 1.8V
>   supplies
> 
> Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 9 ++++++
> 1 file changed, 9 insertions(+)
> 
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index
> 6532a59..13d53bc 100644
> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> @@ -56,6 +56,15 @@ Optional properties:
>  - adi,disable-timing-generator: Only for ADV7533. Disables the internal
> timing generator. The chip will rely on the sync signals in the DSI data
> lanes, rather than generate its own timings for HDMI output.
> +- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD
> +  pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also
> powers
> +  up the A2VDD pin.
> +- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on
> +  ADV7511 and V3P3 on ADV7533.
> +
> +ADV7533 specific supplies:
> +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
> +  either 1.2V or 1.8V.
> 
>  Required nodes:

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux